--- calico-vxlan.yaml 2020-11-17 08:12:04.783766338 -0800 +++ templates/calico.yaml 2020-11-17 08:10:35.583765716 -0800 @@ -10,13 +10,13 @@ # Typha is disabled. typha_service_name: "none" # Configure the backend to use. - calico_backend: "vxlan" + calico_backend: "{{ .Values.network }}" # Configure the MTU to use for workload interfaces and tunnels. # - If Wireguard is enabled, set to your network MTU - 60 # - Otherwise, if VXLAN or BPF mode is enabled, set to your network MTU - 50 # - Otherwise, if IPIP is enabled, set to your network MTU - 20 # - Otherwise, if not using any encapsulation, set to your network MTU. - veth_mtu: "1410" + veth_mtu: "{{ .Values.mtu }}" # The CNI network configuration to install on each node. The special # values in this config will be automatically populated. @@ -55,3230 +55,6 @@ } --- -# Source: calico/templates/kdd-crds.yaml - - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: bgpconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPConfiguration - listKind: BGPConfigurationList - plural: bgpconfigurations - singular: bgpconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: BGPConfiguration contains the configuration for any BGP routing. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPConfigurationSpec contains the values of the BGP configuration. - properties: - asNumber: - description: 'ASNumber is the default AS number used by a node. [Default: - 64512]' - format: int32 - type: integer - communities: - description: Communities is a list of BGP community values and their - arbitrary names for tagging routes. - items: - description: Community contains standard or large community value - and its name. - properties: - name: - description: Name given to community value. - type: string - value: - description: Value must be of format `aa:nn` or `aa:nn:mm`. - For standard community use `aa:nn` format, where `aa` and - `nn` are 16 bit number. For large community use `aa:nn:mm` - format, where `aa`, `nn` and `mm` are 32 bit number. Where, - `aa` is an AS Number, `nn` and `mm` are per-AS identifier. - pattern: ^(\d+):(\d+)$|^(\d+):(\d+):(\d+)$ - type: string - type: object - type: array - listenPort: - description: ListenPort is the port where BGP protocol should listen. - Defaults to 179 - maximum: 65535 - minimum: 1 - type: integer - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: INFO]' - type: string - nodeToNodeMeshEnabled: - description: 'NodeToNodeMeshEnabled sets whether full node to node - BGP mesh is enabled. [Default: true]' - type: boolean - prefixAdvertisements: - description: PrefixAdvertisements contains per-prefix advertisement - configuration. - items: - description: PrefixAdvertisement configures advertisement properties - for the specified CIDR. - properties: - cidr: - description: CIDR for which properties should be advertised. - type: string - communities: - description: Communities can be list of either community names - already defined in `Specs.Communities` or community value - of format `aa:nn` or `aa:nn:mm`. For standard community use - `aa:nn` format, where `aa` and `nn` are 16 bit number. For - large community use `aa:nn:mm` format, where `aa`, `nn` and - `mm` are 32 bit number. Where,`aa` is an AS Number, `nn` and - `mm` are per-AS identifier. - items: - type: string - type: array - type: object - type: array - serviceClusterIPs: - description: ServiceClusterIPs are the CIDR blocks from which service - cluster IPs are allocated. If specified, Calico will advertise these - blocks, as well as any cluster IPs within them. - items: - description: ServiceClusterIPBlock represents a single allowed ClusterIP - CIDR block. - properties: - cidr: - type: string - type: object - type: array - serviceExternalIPs: - description: ServiceExternalIPs are the CIDR blocks for Kubernetes - Service External IPs. Kubernetes Service ExternalIPs will only be - advertised if they are within one of these blocks. - items: - description: ServiceExternalIPBlock represents a single allowed - External IP CIDR block. - properties: - cidr: - type: string - type: object - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: bgppeers.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPPeer - listKind: BGPPeerList - plural: bgppeers - singular: bgppeer - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPPeerSpec contains the specification for a BGPPeer resource. - properties: - asNumber: - description: The AS Number of the peer. - format: int32 - type: integer - keepOriginalNextHop: - description: Option to keep the original nexthop field when routes - are sent to a BGP Peer. Setting "true" configures the selected BGP - Peers node to use the "next hop keep;" instead of "next hop self;"(default) - in the specific branch of the Node on "bird.cfg". - type: boolean - node: - description: The node name identifying the Calico node instance that - is peering with this peer. If this is not set, this represents a - global peer, i.e. a peer that peers with every node in the deployment. - type: string - nodeSelector: - description: Selector for the nodes that should have this peering. When - this is set, the Node field must be empty. - type: string - password: - description: Optional BGP password for the peerings generated by this - BGPPeer resource. - properties: - secretKeyRef: - description: Selects a key of a secret in the node pod's namespace. - properties: - key: - description: The key of the secret to select from. Must be - a valid secret key. - type: string - name: - description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid?' - type: string - optional: - description: Specify whether the Secret or its key must be - defined - type: boolean - required: - - key - type: object - type: object - peerIP: - description: The IP address of the peer followed by an optional port - number to peer with. If port number is given, format should be `[]:port` - or `:` for IPv4. If optional port number is not set, - and this peer IP and ASNumber belongs to a calico/node with ListenPort - set in BGPConfiguration, then we use that port to peer. - type: string - peerSelector: - description: Selector for the remote nodes to peer with. When this - is set, the PeerIP and ASNumber fields must be empty. For each - peering between the local node and selected remote nodes, we configure - an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified, - and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The - remote AS number comes from the remote node’s NodeBGPSpec.ASNumber, - or the global default if that is not set. - type: string - required: - - asNumber - - peerIP - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: blockaffinities.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BlockAffinity - listKind: BlockAffinityList - plural: blockaffinities - singular: blockaffinity - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BlockAffinitySpec contains the specification for a BlockAffinity - resource. - properties: - cidr: - type: string - deleted: - description: Deleted indicates that this block affinity is being deleted. - This field is a string for compatibility with older releases that - mistakenly treat this field as a string. - type: string - node: - type: string - state: - type: string - required: - - cidr - - deleted - - node - - state - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: clusterinformations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: ClusterInformation - listKind: ClusterInformationList - plural: clusterinformations - singular: clusterinformation - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: ClusterInformation contains the cluster specific information. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: ClusterInformationSpec contains the values of describing - the cluster. - properties: - calicoVersion: - description: CalicoVersion is the version of Calico that the cluster - is running - type: string - clusterGUID: - description: ClusterGUID is the GUID of the cluster - type: string - clusterType: - description: ClusterType describes the type of the cluster - type: string - datastoreReady: - description: DatastoreReady is used during significant datastore migrations - to signal to components such as Felix that it should wait before - accessing the datastore. - type: boolean - variant: - description: Variant declares which variant of Calico should be active. - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: felixconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: FelixConfiguration - listKind: FelixConfigurationList - plural: felixconfigurations - singular: felixconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: Felix Configuration contains the configuration for Felix. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: FelixConfigurationSpec contains the values of the Felix configuration. - properties: - allowIPIPPacketsFromWorkloads: - description: 'AllowIPIPPacketsFromWorkloads controls whether Felix - will add a rule to drop IPIP encapsulated traffic from workloads - [Default: false]' - type: boolean - allowVXLANPacketsFromWorkloads: - description: 'AllowVXLANPacketsFromWorkloads controls whether Felix - will add a rule to drop VXLAN encapsulated traffic from workloads - [Default: false]' - type: boolean - awsSrcDstCheck: - description: 'Set source-destination-check on AWS EC2 instances. Accepted - value must be one of "DoNothing", "Enabled" or "Disabled". [Default: - DoNothing]' - enum: - - DoNothing - - Enable - - Disable - type: string - bpfConnectTimeLoadBalancingEnabled: - description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode, - controls whether Felix installs the connection-time load balancer. The - connect-time load balancer is required for the host to be able to - reach Kubernetes services and it improves the performance of pod-to-service - connections. The only reason to disable it is for debugging purposes. [Default: - true]' - type: boolean - bpfDataIfacePattern: - description: 'BPFDataIfacePattern is a regular expression that controls - which interfaces Felix should attach BPF programs to in order to - catch traffic to/from the network. This needs to match the interfaces - that Calico workload traffic flows over as well as any interfaces - that handle incoming traffic to nodeports and services from outside - the cluster. It should not match the workload interfaces (usually - named cali...). [Default: ^(en.*|eth.*|tunl0$)]' - type: string - bpfDisableUnprivileged: - description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled - sysctl to disable unprivileged use of BPF. This ensures that unprivileged - users cannot access Calico''s BPF maps and cannot insert their own - BPF programs to interfere with Calico''s. [Default: true]' - type: boolean - bpfEnabled: - description: 'BPFEnabled, if enabled Felix will use the BPF dataplane. - [Default: false]' - type: boolean - bpfExternalServiceMode: - description: 'BPFExternalServiceMode in BPF mode, controls how connections - from outside the cluster to services (node ports and cluster IPs) - are forwarded to remote workloads. If set to "Tunnel" then both - request and response traffic is tunneled to the remote node. If - set to "DSR", the request traffic is tunneled but the response traffic - is sent directly from the remote node. In "DSR" mode, the remote - node appears to use the IP of the ingress node; this requires a - permissive L2 network. [Default: Tunnel]' - type: string - bpfKubeProxyEndpointSlicesEnabled: - description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls - whether Felix's embedded kube-proxy accepts EndpointSlices or not. - type: boolean - bpfKubeProxyIptablesCleanupEnabled: - description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF - mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s - iptables chains. Should only be enabled if kube-proxy is not running. [Default: - true]' - type: boolean - bpfKubeProxyMinSyncPeriod: - description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the - minimum time between updates to the dataplane for Felix''s embedded - kube-proxy. Lower values give reduced set-up latency. Higher values - reduce Felix CPU usage by batching up more work. [Default: 1s]' - type: string - bpfLogLevel: - description: 'BPFLogLevel controls the log level of the BPF programs - when in BPF dataplane mode. One of "Off", "Info", or "Debug". The - logs are emitted to the BPF trace pipe, accessible with the command - `tc exec bpf debug`. [Default: Off].' - type: string - chainInsertMode: - description: 'ChainInsertMode controls whether Felix hooks the kernel’s - top-level iptables chains by inserting a rule at the top of the - chain or by appending a rule at the bottom. insert is the safe default - since it prevents Calico’s rules from being bypassed. If you switch - to append mode, be sure that the other rules in the chains signal - acceptance by falling through to the Calico rules, otherwise the - Calico policy will be bypassed. [Default: insert]' - type: string - dataplaneDriver: - type: string - debugDisableLogDropping: - type: boolean - debugMemoryProfilePath: - type: string - debugSimulateCalcGraphHangAfter: - type: string - debugSimulateDataplaneHangAfter: - type: string - defaultEndpointToHostAction: - description: 'DefaultEndpointToHostAction controls what happens to - traffic that goes from a workload endpoint to the host itself (after - the traffic hits the endpoint egress policy). By default Calico - blocks traffic from workload endpoints to the host itself with an - iptables “DROP” action. If you want to allow some or all traffic - from endpoint to host, set this parameter to RETURN or ACCEPT. Use - RETURN if you have your own rules in the iptables “INPUT” chain; - Calico will insert its rules at the top of that chain, then “RETURN” - packets to the “INPUT” chain once it has completed processing workload - endpoint egress policy. Use ACCEPT to unconditionally accept packets - from workloads after processing workload endpoint egress policy. - [Default: Drop]' - type: string - deviceRouteProtocol: - description: This defines the route protocol added to programmed device - routes, by default this will be RTPROT_BOOT when left blank. - type: integer - deviceRouteSourceAddress: - description: This is the source address to use on programmed device - routes. By default the source address is left blank, leaving the - kernel to choose the source address used. - type: string - disableConntrackInvalidCheck: - type: boolean - endpointReportingDelay: - type: string - endpointReportingEnabled: - type: boolean - externalNodesList: - description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes - which may source tunnel traffic and have the tunneled traffic be - accepted at calico nodes. - items: - type: string - type: array - failsafeInboundHostPorts: - description: 'FailsafeInboundHostPorts is a comma-delimited list of - UDP/TCP ports that Felix will allow incoming traffic to host endpoints - on irrespective of the security policy. This is useful to avoid - accidentally cutting off a host with incorrect configuration. Each - port should be specified as tcp: or udp:. - For back-compatibility, if the protocol is not specified, it defaults - to “tcp”. To disable all inbound host ports, use the value none. - The default value allows ssh access and DHCP. [Default: tcp:22, - udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]' - items: - description: ProtoPort is combination of protocol and port, both - must be specified. - properties: - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - failsafeOutboundHostPorts: - description: 'FailsafeOutboundHostPorts is a comma-delimited list - of UDP/TCP ports that Felix will allow outgoing traffic from host - endpoints to irrespective of the security policy. This is useful - to avoid accidentally cutting off a host with incorrect configuration. - Each port should be specified as tcp: or udp:. - For back-compatibility, if the protocol is not specified, it defaults - to “tcp”. To disable all outbound host ports, use the value none. - The default value opens etcd’s standard ports to ensure that Felix - does not get cut off from etcd as well as allowing DHCP and DNS. - [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667, - udp:53, udp:67]' - items: - description: ProtoPort is combination of protocol and port, both - must be specified. - properties: - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - featureDetectOverride: - description: FeatureDetectOverride is used to override the feature - detection. Values are specified in a comma separated list with no - spaces, example; "SNATFullyRandom=true,MASQFullyRandom=false,RestoreSupportsLock=". - "true" or "false" will force the feature, empty or omitted values - are auto-detected. - type: string - genericXDPEnabled: - description: 'GenericXDPEnabled enables Generic XDP so network cards - that don''t support XDP offload or driver modes can use XDP. This - is not recommended since it doesn''t provide better performance - than iptables. [Default: false]' - type: boolean - healthEnabled: - type: boolean - healthHost: - type: string - healthPort: - type: integer - interfaceExclude: - description: 'InterfaceExclude is a comma-separated list of interfaces - that Felix should exclude when monitoring for host endpoints. The - default value ensures that Felix ignores Kubernetes'' IPVS dummy - interface, which is used internally by kube-proxy. If you want to - exclude multiple interface names using a single value, the list - supports regular expressions. For regular expressions you must wrap - the value with ''/''. For example having values ''/^kube/,veth1'' - will exclude all interfaces that begin with ''kube'' and also the - interface ''veth1''. [Default: kube-ipvs0]' - type: string - interfacePrefix: - description: 'InterfacePrefix is the interface name prefix that identifies - workload endpoints and so distinguishes them from host endpoint - interfaces. Note: in environments other than bare metal, the orchestrators - configure this appropriately. For example our Kubernetes and Docker - integrations set the ‘cali’ value, and our OpenStack integration - sets the ‘tap’ value. [Default: cali]' - type: string - interfaceRefreshInterval: - description: InterfaceRefreshInterval is the period at which Felix - rescans local interfaces to verify their state. The rescan can be - disabled by setting the interval to 0. - type: string - ipipEnabled: - type: boolean - ipipMTU: - description: 'IPIPMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - ipsetsRefreshInterval: - description: 'IpsetsRefreshInterval is the period at which Felix re-checks - all iptables state to ensure that no other process has accidentally - broken Calico’s rules. Set to 0 to disable iptables refresh. [Default: - 90s]' - type: string - iptablesBackend: - description: IptablesBackend specifies which backend of iptables will - be used. The default is legacy. - type: string - iptablesFilterAllowAction: - type: string - iptablesLockFilePath: - description: 'IptablesLockFilePath is the location of the iptables - lock file. You may need to change this if the lock file is not in - its standard location (for example if you have mapped it into Felix’s - container at a different path). [Default: /run/xtables.lock]' - type: string - iptablesLockProbeInterval: - description: 'IptablesLockProbeInterval is the time that Felix will - wait between attempts to acquire the iptables lock if it is not - available. Lower values make Felix more responsive when the lock - is contended, but use more CPU. [Default: 50ms]' - type: string - iptablesLockTimeout: - description: 'IptablesLockTimeout is the time that Felix will wait - for the iptables lock, or 0, to disable. To use this feature, Felix - must share the iptables lock file with all other processes that - also take the lock. When running Felix inside a container, this - requires the /run directory of the host to be mounted into the calico/node - or calico/felix container. [Default: 0s disabled]' - type: string - iptablesMangleAllowAction: - type: string - iptablesMarkMask: - description: 'IptablesMarkMask is the mask that Felix selects its - IPTables Mark bits from. Should be a 32 bit hexadecimal number with - at least 8 bits set, none of which clash with any other mark bits - in use on the system. [Default: 0xff000000]' - format: int32 - type: integer - iptablesNATOutgoingInterfaceFilter: - type: string - iptablesPostWriteCheckInterval: - description: 'IptablesPostWriteCheckInterval is the period after Felix - has done a write to the dataplane that it schedules an extra read - back in order to check the write was not clobbered by another process. - This should only occur if another application on the system doesn’t - respect the iptables lock. [Default: 1s]' - type: string - iptablesRefreshInterval: - description: 'IptablesRefreshInterval is the period at which Felix - re-checks the IP sets in the dataplane to ensure that no other process - has accidentally broken Calico’s rules. Set to 0 to disable IP sets - refresh. Note: the default for this value is lower than the other - refresh intervals as a workaround for a Linux kernel bug that was - fixed in kernel version 4.11. If you are using v4.11 or greater - you may want to set this to, a higher value to reduce Felix CPU - usage. [Default: 10s]' - type: string - ipv6Support: - type: boolean - kubeNodePortRanges: - description: 'KubeNodePortRanges holds list of port ranges used for - service node ports. Only used if felix detects kube-proxy running - in ipvs mode. Felix uses these ranges to separate host and workload - traffic. [Default: 30000:32767].' - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - logFilePath: - description: 'LogFilePath is the full path to the Felix log. Set to - none to disable file logging. [Default: /var/log/calico/felix.log]' - type: string - logPrefix: - description: 'LogPrefix is the log prefix that Felix uses when rendering - LOG rules. [Default: calico-packet]' - type: string - logSeverityFile: - description: 'LogSeverityFile is the log severity above which logs - are sent to the log file. [Default: Info]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - logSeveritySys: - description: 'LogSeveritySys is the log severity above which logs - are sent to the syslog. Set to None for no logging to syslog. [Default: - Info]' - type: string - maxIpsetSize: - type: integer - metadataAddr: - description: 'MetadataAddr is the IP address or domain name of the - server that can answer VM queries for cloud-init metadata. In OpenStack, - this corresponds to the machine running nova-api (or in Ubuntu, - nova-api-metadata). A value of none (case insensitive) means that - Felix should not set up any NAT rule for the metadata path. [Default: - 127.0.0.1]' - type: string - metadataPort: - description: 'MetadataPort is the port of the metadata server. This, - combined with global.MetadataAddr (if not ‘None’), is used to set - up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. - In most cases this should not need to be changed [Default: 8775].' - type: integer - natOutgoingAddress: - description: NATOutgoingAddress specifies an address to use when performing - source NAT for traffic in a natOutgoing pool that is leaving the - network. By default the address used is an address on the interface - the traffic is leaving on (ie it uses the iptables MASQUERADE target) - type: string - natPortRange: - anyOf: - - type: integer - - type: string - description: NATPortRange specifies the range of ports that is used - for port mapping when doing outgoing NAT. When unset the default - behavior of the network stack is used. - pattern: ^.* - x-kubernetes-int-or-string: true - netlinkTimeout: - type: string - openstackRegion: - description: 'OpenstackRegion is the name of the region that a particular - Felix belongs to. In a multi-region Calico/OpenStack deployment, - this must be configured somehow for each Felix (here in the datamodel, - or in felix.cfg or the environment on each compute node), and must - match the [calico] openstack_region value configured in neutron.conf - on each node. [Default: Empty]' - type: string - policySyncPathPrefix: - description: 'PolicySyncPathPrefix is used to by Felix to communicate - policy changes to external services, like Application layer policy. - [Default: Empty]' - type: string - prometheusGoMetricsEnabled: - description: 'PrometheusGoMetricsEnabled disables Go runtime metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - prometheusMetricsEnabled: - description: 'PrometheusMetricsEnabled enables the Prometheus metrics - server in Felix if set to true. [Default: false]' - type: boolean - prometheusMetricsHost: - description: 'PrometheusMetricsHost is the host that the Prometheus - metrics server should bind to. [Default: empty]' - type: string - prometheusMetricsPort: - description: 'PrometheusMetricsPort is the TCP port that the Prometheus - metrics server should bind to. [Default: 9091]' - type: integer - prometheusProcessMetricsEnabled: - description: 'PrometheusProcessMetricsEnabled disables process metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - removeExternalRoutes: - description: Whether or not to remove device routes that have not - been programmed by Felix. Disabling this will allow external applications - to also add device routes. This is enabled by default which means - we will remove externally added routes. - type: boolean - reportingInterval: - description: 'ReportingInterval is the interval at which Felix reports - its status into the datastore or 0 to disable. Must be non-zero - in OpenStack deployments. [Default: 30s]' - type: string - reportingTTL: - description: 'ReportingTTL is the time-to-live setting for process-wide - status reports. [Default: 90s]' - type: string - routeRefreshInterval: - description: 'RouterefreshInterval is the period at which Felix re-checks - the routes in the dataplane to ensure that no other process has - accidentally broken Calico’s rules. Set to 0 to disable route refresh. - [Default: 90s]' - type: string - routeSource: - description: 'RouteSource configures where Felix gets its routing - information. - WorkloadIPs: use workload endpoints to construct - routes. - CalicoIPAM: the default - use IPAM data to construct routes.' - type: string - routeTableRange: - description: Calico programs additional Linux route tables for various - purposes. RouteTableRange specifies the indices of the route tables - that Calico should use. - properties: - max: - type: integer - min: - type: integer - required: - - max - - min - type: object - sidecarAccelerationEnabled: - description: 'SidecarAccelerationEnabled enables experimental sidecar - acceleration [Default: false]' - type: boolean - usageReportingEnabled: - description: 'UsageReportingEnabled reports anonymous Calico version - number and cluster size to projectcalico.org. Logs warnings returned - by the usage server. For example, if a significant security vulnerability - has been discovered in the version of Calico being used. [Default: - true]' - type: boolean - usageReportingInitialDelay: - description: 'UsageReportingInitialDelay controls the minimum delay - before Felix makes a report. [Default: 300s]' - type: string - usageReportingInterval: - description: 'UsageReportingInterval controls the interval at which - Felix makes reports. [Default: 86400s]' - type: string - useInternalDataplaneDriver: - type: boolean - vxlanEnabled: - type: boolean - vxlanMTU: - description: 'VXLANMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - vxlanPort: - type: integer - vxlanVNI: - type: integer - wireguardEnabled: - description: 'WireguardEnabled controls whether Wireguard is enabled. - [Default: false]' - type: boolean - wireguardInterfaceName: - description: 'WireguardInterfaceName specifies the name to use for - the Wireguard interface. [Default: wg.calico]' - type: string - wireguardListeningPort: - description: 'WireguardListeningPort controls the listening port used - by Wireguard. [Default: 51820]' - type: integer - wireguardMTU: - description: 'WireguardMTU controls the MTU on the Wireguard interface. - See Configuring MTU [Default: 1420]' - type: integer - wireguardRoutingRulePriority: - description: 'WireguardRoutingRulePriority controls the priority value - to use for the Wireguard routing rule. [Default: 99]' - type: integer - xdpEnabled: - description: 'XDPEnabled enables XDP acceleration for suitable untracked - incoming deny rules. [Default: true]' - type: boolean - xdpRefreshInterval: - description: 'XDPRefreshInterval is the period at which Felix re-checks - all XDP state to ensure that no other process has accidentally broken - Calico''s BPF maps or attached programs. Set to 0 to disable XDP - refresh. [Default: 90s]' - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: globalnetworkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkPolicy - listKind: GlobalNetworkPolicyList - plural: globalnetworkpolicies - singular: globalnetworkpolicy - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - applyOnForward: - description: ApplyOnForward indicates to apply the rules in this policy - on forward traffic. - type: boolean - doNotTrack: - description: DoNotTrack indicates whether packets matched by the rules - in this policy should go through the data plane's connection tracking, - such as Linux conntrack. If True, the rules in this policy are - applied before any data plane connection tracking, and packets allowed - by this policy are marked as not to be tracked. - type: boolean - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - namespaceSelector: - description: NamespaceSelector is an optional field for an expression - used to select a pod based on namespaces. - type: string - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - preDNAT: - description: PreDNAT indicates to apply the rules in this policy before - any DNAT. - type: boolean - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress rules are present in the policy. The - default is: \n - [ PolicyTypeIngress ], if there are no Egress rules - (including the case where there are also no Ingress rules) \n - - [ PolicyTypeEgress ], if there are Egress rules but no Ingress - rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are - both Ingress and Egress rules. \n When the policy is read back again, - Types will always be one of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: globalnetworksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkSet - listKind: GlobalNetworkSetList - plural: globalnetworksets - singular: globalnetworkset - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs - that share labels to allow rules to refer to them via selectors. The labels - of GlobalNetworkSet are not namespaced. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: GlobalNetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: hostendpoints.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: HostEndpoint - listKind: HostEndpointList - plural: hostendpoints - singular: hostendpoint - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: HostEndpointSpec contains the specification for a HostEndpoint - resource. - properties: - expectedIPs: - description: "The expected IP addresses (IPv4 and IPv6) of the endpoint. - If \"InterfaceName\" is not present, Calico will look for an interface - matching any of the IPs in the list and apply policy to that. Note: - \tWhen using the selector match criteria in an ingress or egress - security Policy \tor Profile, Calico converts the selector into - a set of IP addresses. For host \tendpoints, the ExpectedIPs field - is used for that purpose. (If only the interface \tname is specified, - Calico does not learn the IPs of the interface for use in match - \tcriteria.)" - items: - type: string - type: array - interfaceName: - description: "Either \"*\", or the name of a specific Linux interface - to apply policy to; or empty. \"*\" indicates that this HostEndpoint - governs all traffic to, from or through the default network namespace - of the host named by the \"Node\" field; entering and leaving that - namespace via any interface, including those from/to non-host-networked - local workloads. \n If InterfaceName is not \"*\", this HostEndpoint - only governs traffic that enters or leaves the host through the - specific interface named by InterfaceName, or - when InterfaceName - is empty - through the specific interface that has one of the IPs - in ExpectedIPs. Therefore, when InterfaceName is empty, at least - one expected IP must be specified. Only external interfaces (such - as “eth0”) are supported here; it isn't possible for a HostEndpoint - to protect traffic through a specific local workload interface. - \n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints; - initially just pre-DNAT policy. Please check Calico documentation - for the latest position." - type: string - node: - description: The node name identifying the Calico node instance. - type: string - ports: - description: Ports contains the endpoint's named ports, which may - be referenced in security policy rules. - items: - properties: - name: - type: string - port: - type: integer - protocol: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - required: - - name - - port - - protocol - type: object - type: array - profiles: - description: A list of identifiers of security Profile objects that - apply to this endpoint. Each profile is applied in the order that - they appear in this list. Profile rules are applied after the selector-based - security policy. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamblocks.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMBlock - listKind: IPAMBlockList - plural: ipamblocks - singular: ipamblock - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMBlockSpec contains the specification for an IPAMBlock - resource. - properties: - affinity: - type: string - allocations: - items: - type: integer - # TODO: This nullable is manually added in. We should update controller-gen - # to handle []*int properly itself. - nullable: true - type: array - attributes: - items: - properties: - handle_id: - type: string - secondary: - additionalProperties: - type: string - type: object - type: object - type: array - cidr: - type: string - deleted: - type: boolean - strictAffinity: - type: boolean - unallocated: - items: - type: integer - type: array - required: - - allocations - - attributes - - cidr - - deleted - - strictAffinity - - unallocated - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamconfigs.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMConfig - listKind: IPAMConfigList - plural: ipamconfigs - singular: ipamconfig - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMConfigSpec contains the specification for an IPAMConfig - resource. - properties: - autoAllocateBlocks: - type: boolean - strictAffinity: - type: boolean - required: - - autoAllocateBlocks - - strictAffinity - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamhandles.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMHandle - listKind: IPAMHandleList - plural: ipamhandles - singular: ipamhandle - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMHandleSpec contains the specification for an IPAMHandle - resource. - properties: - block: - additionalProperties: - type: integer - type: object - handleID: - type: string - required: - - block - - handleID - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ippools.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPPool - listKind: IPPoolList - plural: ippools - singular: ippool - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPPoolSpec contains the specification for an IPPool resource. - properties: - blockSize: - description: The block size to use for IP address assignments from - this pool. Defaults to 26 for IPv4 and 112 for IPv6. - type: integer - cidr: - description: The pool CIDR. - type: string - disabled: - description: When disabled is true, Calico IPAM will not assign addresses - from this pool. - type: boolean - ipip: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - properties: - enabled: - description: When enabled is true, ipip tunneling will be used - to deliver packets to destinations within this pool. - type: boolean - mode: - description: The IPIP mode. This can be one of "always" or "cross-subnet". A - mode of "always" will also use IPIP tunneling for routing to - destination IP addresses within this pool. A mode of "cross-subnet" - will only use IPIP tunneling when the destination node is on - a different subnet to the originating node. The default value - (if not specified) is "always". - type: string - type: object - ipipMode: - description: Contains configuration for IPIP tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. IPIP tunneling - is disabled). - type: string - nat-outgoing: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - type: boolean - natOutgoing: - description: When nat-outgoing is true, packets sent from Calico networked - containers in this pool to destinations outside of this pool will - be masqueraded. - type: boolean - nodeSelector: - description: Allows IPPool to allocate for a specific node by label - selector. - type: string - vxlanMode: - description: Contains configuration for VXLAN tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. VXLAN - tunneling is disabled). - type: string - required: - - cidr - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: kubecontrollersconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: KubeControllersConfiguration - listKind: KubeControllersConfigurationList - plural: kubecontrollersconfigurations - singular: kubecontrollersconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: KubeControllersConfigurationSpec contains the values of the - Kubernetes controllers configuration. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host endpoints. - Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation of - host endpoints for every node. [Default: Disabled]' - type: string - type: object - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - type: object - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - required: - - controllers - type: object - status: - description: KubeControllersConfigurationStatus represents the status - of the configuration. It's useful for admins to be able to see the actual - config that was applied, which can be modified by environment variables - on the kube-controllers process. - properties: - environmentVars: - additionalProperties: - type: string - description: EnvironmentVars contains the environment variables on - the kube-controllers that influenced the RunningConfig. - type: object - runningConfig: - description: RunningConfig contains the effective config that is running - in the kube-controllers pod, after merging the API resource with - any environment variables. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace - controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host - endpoints. Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation - of host endpoints for every node. [Default: Disabled]' - type: string - type: object - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - type: object - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which - logs are sent to the stdout. [Default: Info]' - type: string - required: - - controllers - type: object - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: networkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkPolicy - listKind: NetworkPolicyList - plural: networkpolicies - singular: networkpolicy - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress are present in the policy. The default - is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including - the case where there are also no Ingress rules) \n - [ PolicyTypeEgress - ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, - PolicyTypeEgress ], if there are both Ingress and Egress rules. - \n When the policy is read back again, Types will always be one - of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: networksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkSet - listKind: NetworkSetList - plural: networksets - singular: networkset - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: NetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- ---- # Source: calico/templates/calico-kube-controllers-rbac.yaml # Include a clusterrole for the kube-controllers component, @@ -3563,38 +339,10 @@ terminationGracePeriodSeconds: 0 priorityClassName: system-node-critical initContainers: - # This container performs upgrade from host-local IPAM to calico-ipam. - # It can be deleted if this is a fresh installation, or if you have already - # upgraded to use calico-ipam. - - name: upgrade-ipam - image: calico/cni:v3.16.5 - command: ["/opt/cni/bin/calico-ipam", "-upgrade"] - envFrom: - - configMapRef: - # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. - name: kubernetes-services-endpoint - optional: true - env: - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - - name: CALICO_NETWORKING_BACKEND - valueFrom: - configMapKeyRef: - name: calico-config - key: calico_backend - volumeMounts: - - mountPath: /var/lib/cni/networks - name: host-local-net-dir - - mountPath: /host/opt/cni/bin - name: cni-bin-dir - securityContext: - privileged: true # This container installs the CNI binaries # and CNI network config file on each node. - name: install-cni - image: calico/cni:v3.16.5 + image: calico/cni:{{ default .Chart.AppVersion .Values.image.tag }} command: ["/opt/cni/bin/install"] envFrom: - configMapRef: @@ -3635,7 +383,7 @@ # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes # to communicate with Felix over the Policy Sync API. - name: flexvol-driver - image: calico/pod2daemon-flexvol:v3.16.5 + image: calico/pod2daemon-flexvol:{{ default .Chart.AppVersion .Values.image.tag }} volumeMounts: - name: flexvol-driver-host mountPath: /host/driver @@ -3646,7 +394,7 @@ # container programs network policy and routes on each # host. - name: calico-node - image: calico/node:v3.16.5 + image: calico/node:{{ default .Chart.AppVersion .Values.image.tag }} envFrom: - configMapRef: # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. @@ -3672,7 +420,7 @@ key: calico_backend # Cluster type to identify the deployment type - name: CLUSTER_TYPE - value: "k8s,bgp" + value: "k8s,kubeadm" # Auto-detect the BGP IP address. - name: IP value: "autodetect" @@ -3702,7 +450,7 @@ key: veth_mtu # Disable AWS source-destination check on nodes. - name: FELIX_AWSSRCDSTCHECK - value: Disable + value: DoNothing # The default IPv4 pool to create on startup if none exists. Pod IPs will be # chosen from this range. Changing this value after installation will have # no effect. This should fall within `--cluster-cidr`. @@ -3719,7 +467,15 @@ value: "false" # Set Felix logging to "info" - name: FELIX_LOGSEVERITYSCREEN - value: "info" + value: "{{ .Values.loglevel }}" + - name: FELIX_LOGSEVERITYFILE + value: "{{ .Values.loglevel }}" + - name: FELIX_LOGSEVERITYSYS + value: "" + - name: FELIX_PROMETHEUSGOMETRICSENABLED + value: "{{ .Values.prometheus }}" + - name: FELIX_PROMETHEUSMETRICSENABLED + value: "{{ .Values.prometheus }}" - name: FELIX_HEALTHENABLED value: "true" securityContext: @@ -3840,6 +596,7 @@ spec: nodeSelector: kubernetes.io/os: linux + node-role.kubernetes.io/control-plane: "" tolerations: # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly @@ -3850,7 +607,7 @@ priorityClassName: system-cluster-critical containers: - name: calico-kube-controllers - image: calico/kube-controllers:v3.16.5 + image: calico/kube-controllers:{{ default .Chart.AppVersion .Values.image.tag }} env: # Choose which controllers to run. - name: ENABLED_CONTROLLERS