diff --git a/artifacts/kubezero-calico/README.md b/artifacts/kubezero-calico/README.md deleted file mode 100644 index c730a4c3..00000000 --- a/artifacts/kubezero-calico/README.md +++ /dev/null @@ -1,31 +0,0 @@ -# Calico CNI - -Current top-level still contains the deprecated Canal implementation. -Removed once new AWS config is tested and rolled out to all existing clusters. - -## AWS -Calico is setup based on the upstream calico-vxlan config from -`https://docs.projectcalico.org/v3.15/manifests/calico-vxlan.yaml` - -Changes: - -- VxLAN set to Always to not expose cluster communication to VPC - - -> EC2 SecurityGroups still apply and only need to allow UDP 4789 for VxLAN traffic - -> No need to disable source/destination check on EC2 instances - -> Prepared for optional WireGuard encryption for all inter node traffic - -- MTU set to 8941 - -- Removed migration init-container - -- Disable BGB and BIRD health checks - -- Set FELIX log level to warning - -- Enable Prometheus metrics - - -## Prometheus - -See: https://grafana.com/grafana/dashboards/12175 diff --git a/artifacts/kubezero-calico/aws/calico-v3.15.patch b/artifacts/kubezero-calico/aws/calico-v3.15.patch deleted file mode 100644 index 786d2906..00000000 --- a/artifacts/kubezero-calico/aws/calico-v3.15.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- calico-vxlan.yaml 2020-07-03 15:32:40.740506882 +0100 -+++ calico.yaml 2020-07-03 15:27:47.651499841 +0100 -@@ -10,13 +10,13 @@ - # Typha is disabled. - typha_service_name: "none" - # Configure the backend to use. -- calico_backend: "bird" -+ calico_backend: "vxlan" - # Configure the MTU to use for workload interfaces and tunnels. - # - If Wireguard is enabled, set to your network MTU - 60 - # - Otherwise, if VXLAN or BPF mode is enabled, set to your network MTU - 50 - # - Otherwise, if IPIP is enabled, set to your network MTU - 20 - # - Otherwise, if not using any encapsulation, set to your network MTU. -- veth_mtu: "1410" -+ veth_mtu: "8941" - - # The CNI network configuration to install on each node. The special - # values in this config will be automatically populated. -@@ -3451,29 +3451,6 @@ - terminationGracePeriodSeconds: 0 - priorityClassName: system-node-critical - initContainers: -- # This container performs upgrade from host-local IPAM to calico-ipam. -- # It can be deleted if this is a fresh installation, or if you have already -- # upgraded to use calico-ipam. -- - name: upgrade-ipam -- image: calico/cni:v3.15.0 -- command: ["/opt/cni/bin/calico-ipam", "-upgrade"] -- env: -- - name: KUBERNETES_NODE_NAME -- valueFrom: -- fieldRef: -- fieldPath: spec.nodeName -- - name: CALICO_NETWORKING_BACKEND -- valueFrom: -- configMapKeyRef: -- name: calico-config -- key: calico_backend -- volumeMounts: -- - mountPath: /var/lib/cni/networks -- name: host-local-net-dir -- - mountPath: /host/opt/cni/bin -- name: cni-bin-dir -- securityContext: -- privileged: true - # This container installs the CNI binaries - # and CNI network config file on each node. - - name: install-cni -@@ -3545,7 +3522,7 @@ - key: calico_backend - # Cluster type to identify the deployment type - - name: CLUSTER_TYPE -- value: "k8s,bgp" -+ value: "k8s,kubeadm" - # Auto-detect the BGP IP address. - - name: IP - value: "autodetect" -@@ -3554,7 +3531,7 @@ - value: "Never" - # Enable or Disable VXLAN on the default IP pool. - - name: CALICO_IPV4POOL_VXLAN -- value: "CrossSubnet" -+ value: "Always" - # Set MTU for tunnel device used if ipip is enabled - - name: FELIX_IPINIPMTU - valueFrom: -@@ -3595,9 +3572,17 @@ - value: "false" - # Set Felix logging to "info" - - name: FELIX_LOGSEVERITYSCREEN -- value: "info" -+ value: "Warning" -+ - name: FELIX_LOGSEVERITYFILE -+ value: "Warning" -+ - name: FELIX_LOGSEVERITYSYS -+ value: "" - - name: FELIX_HEALTHENABLED - value: "true" -+ - name: FELIX_PROMETHEUSGOMETRICSENABLED -+ value: "false" -+ - name: FELIX_PROMETHEUSMETRICSENABLED -+ value: "true" - securityContext: - privileged: true - resources: -@@ -3608,7 +3593,6 @@ - command: - - /bin/calico-node - - -felix-live -- - -bird-live - periodSeconds: 10 - initialDelaySeconds: 10 - failureThreshold: 6 -@@ -3617,7 +3601,6 @@ - command: - - /bin/calico-node - - -felix-ready -- - -bird-ready - periodSeconds: 10 - volumeMounts: - - mountPath: /lib/modules diff --git a/artifacts/kubezero-calico/aws/calico.yaml b/artifacts/kubezero-calico/aws/calico.yaml deleted file mode 100644 index de2d34e1..00000000 --- a/artifacts/kubezero-calico/aws/calico.yaml +++ /dev/null @@ -1,3733 +0,0 @@ ---- -# Source: calico/templates/calico-config.yaml -# This ConfigMap is used to configure a self-hosted Calico installation. -kind: ConfigMap -apiVersion: v1 -metadata: - name: calico-config - namespace: kube-system -data: - # Typha is disabled. - typha_service_name: "none" - # Configure the backend to use. - calico_backend: "vxlan" - # Configure the MTU to use for workload interfaces and tunnels. - # - If Wireguard is enabled, set to your network MTU - 60 - # - Otherwise, if VXLAN or BPF mode is enabled, set to your network MTU - 50 - # - Otherwise, if IPIP is enabled, set to your network MTU - 20 - # - Otherwise, if not using any encapsulation, set to your network MTU. - veth_mtu: "8941" - - # The CNI network configuration to install on each node. The special - # values in this config will be automatically populated. - cni_network_config: |- - { - "name": "k8s-pod-network", - "cniVersion": "0.3.1", - "plugins": [ - { - "type": "calico", - "log_level": "info", - "datastore_type": "kubernetes", - "nodename": "__KUBERNETES_NODE_NAME__", - "mtu": __CNI_MTU__, - "ipam": { - "type": "calico-ipam" - }, - "policy": { - "type": "k8s" - }, - "kubernetes": { - "kubeconfig": "__KUBECONFIG_FILEPATH__" - } - }, - { - "type": "portmap", - "snat": true, - "capabilities": {"portMappings": true} - }, - { - "type": "bandwidth", - "capabilities": {"bandwidth": true} - } - ] - } - ---- -# Source: calico/templates/kdd-crds.yaml - - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: bgpconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPConfiguration - listKind: BGPConfigurationList - plural: bgpconfigurations - singular: bgpconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: BGPConfiguration contains the configuration for any BGP routing. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPConfigurationSpec contains the values of the BGP configuration. - properties: - asNumber: - description: 'ASNumber is the default AS number used by a node. [Default: - 64512]' - format: int32 - type: integer - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: INFO]' - type: string - nodeToNodeMeshEnabled: - description: 'NodeToNodeMeshEnabled sets whether full node to node - BGP mesh is enabled. [Default: true]' - type: boolean - serviceClusterIPs: - description: ServiceClusterIPs are the CIDR blocks from which service - cluster IPs are allocated. If specified, Calico will advertise these - blocks, as well as any cluster IPs within them. - items: - description: ServiceClusterIPBlock represents a single whitelisted - CIDR block for ClusterIPs. - properties: - cidr: - type: string - type: object - type: array - serviceExternalIPs: - description: ServiceExternalIPs are the CIDR blocks for Kubernetes - Service External IPs. Kubernetes Service ExternalIPs will only be - advertised if they are within one of these blocks. - items: - description: ServiceExternalIPBlock represents a single whitelisted - CIDR External IP block. - properties: - cidr: - type: string - type: object - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: bgppeers.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPPeer - listKind: BGPPeerList - plural: bgppeers - singular: bgppeer - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPPeerSpec contains the specification for a BGPPeer resource. - properties: - asNumber: - description: The AS Number of the peer. - format: int32 - type: integer - node: - description: The node name identifying the Calico node instance that - is peering with this peer. If this is not set, this represents a - global peer, i.e. a peer that peers with every node in the deployment. - type: string - nodeSelector: - description: Selector for the nodes that should have this peering. When - this is set, the Node field must be empty. - type: string - peerIP: - description: The IP address of the peer. - type: string - peerSelector: - description: Selector for the remote nodes to peer with. When this - is set, the PeerIP and ASNumber fields must be empty. For each - peering between the local node and selected remote nodes, we configure - an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified, - and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The - remote AS number comes from the remote node’s NodeBGPSpec.ASNumber, - or the global default if that is not set. - type: string - required: - - asNumber - - peerIP - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: blockaffinities.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BlockAffinity - listKind: BlockAffinityList - plural: blockaffinities - singular: blockaffinity - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BlockAffinitySpec contains the specification for a BlockAffinity - resource. - properties: - cidr: - type: string - deleted: - description: Deleted indicates that this block affinity is being deleted. - This field is a string for compatibility with older releases that - mistakenly treat this field as a string. - type: string - node: - type: string - state: - type: string - required: - - cidr - - deleted - - node - - state - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: clusterinformations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: ClusterInformation - listKind: ClusterInformationList - plural: clusterinformations - singular: clusterinformation - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: ClusterInformation contains the cluster specific information. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: ClusterInformationSpec contains the values of describing - the cluster. - properties: - calicoVersion: - description: CalicoVersion is the version of Calico that the cluster - is running - type: string - clusterGUID: - description: ClusterGUID is the GUID of the cluster - type: string - clusterType: - description: ClusterType describes the type of the cluster - type: string - datastoreReady: - description: DatastoreReady is used during significant datastore migrations - to signal to components such as Felix that it should wait before - accessing the datastore. - type: boolean - variant: - description: Variant declares which variant of Calico should be active. - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: felixconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: FelixConfiguration - listKind: FelixConfigurationList - plural: felixconfigurations - singular: felixconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: Felix Configuration contains the configuration for Felix. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: FelixConfigurationSpec contains the values of the Felix configuration. - properties: - bpfConnectTimeLoadBalancingEnabled: - description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode, - controls whether Felix installs the connection-time load balancer. The - connect-time load balancer is required for the host to be able to - reach Kubernetes services and it improves the performance of pod-to-service - connections. The only reason to disable it is for debugging purposes. [Default: - true]' - type: boolean - bpfDataIfacePattern: - description: 'BPFDataIfacePattern is a regular expression that controls - which interfaces Felix should attach BPF programs to in order to - catch traffic to/from the network. This needs to match the interfaces - that Calico workload traffic flows over as well as any interfaces - that handle incoming traffic to nodeports and services from outside - the cluster. It should not match the workload interfaces (usually - named cali...). [Default: ^(en.*|eth.*|tunl0$)]' - type: string - bpfDisableUnprivileged: - description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled - sysctl to disable unprivileged use of BPF. This ensures that unprivileged - users cannot access Calico''s BPF maps and cannot insert their own - BPF programs to interfere with Calico''s. [Default: true]' - type: boolean - bpfEnabled: - description: 'BPFEnabled, if enabled Felix will use the BPF dataplane. - [Default: false]' - type: boolean - bpfExternalServiceMode: - description: 'BPFExternalServiceMode in BPF mode, controls how connections - from outside the cluster to services (node ports and cluster IPs) - are forwarded to remote workloads. If set to "Tunnel" then both - request and response traffic is tunneled to the remote node. If - set to "DSR", the request traffic is tunneled but the response traffic - is sent directly from the remote node. In "DSR" mode, the remote - node appears to use the IP of the ingress node; this requires a - permissive L2 network. [Default: Tunnel]' - type: string - bpfKubeProxyEndpointSlicesEnabled: - description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls - whether Felix's embedded kube-proxy accepts EndpointSlices or not. - type: boolean - bpfKubeProxyIptablesCleanupEnabled: - description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF - mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s - iptables chains. Should only be enabled if kube-proxy is not running. [Default: - true]' - type: boolean - bpfKubeProxyMinSyncPeriod: - description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the - minimum time between updates to the dataplane for Felix''s embedded - kube-proxy. Lower values give reduced set-up latency. Higher values - reduce Felix CPU usage by batching up more work. [Default: 1s]' - type: string - bpfLogLevel: - description: 'BPFLogLevel controls the log level of the BPF programs - when in BPF dataplane mode. One of "Off", "Info", or "Debug". The - logs are emitted to the BPF trace pipe, accessible with the command - `tc exec bpf debug`. [Default: Off].' - type: string - chainInsertMode: - description: 'ChainInsertMode controls whether Felix hooks the kernel’s - top-level iptables chains by inserting a rule at the top of the - chain or by appending a rule at the bottom. insert is the safe default - since it prevents Calico’s rules from being bypassed. If you switch - to append mode, be sure that the other rules in the chains signal - acceptance by falling through to the Calico rules, otherwise the - Calico policy will be bypassed. [Default: insert]' - type: string - dataplaneDriver: - type: string - debugDisableLogDropping: - type: boolean - debugMemoryProfilePath: - type: string - debugSimulateCalcGraphHangAfter: - type: string - debugSimulateDataplaneHangAfter: - type: string - defaultEndpointToHostAction: - description: 'DefaultEndpointToHostAction controls what happens to - traffic that goes from a workload endpoint to the host itself (after - the traffic hits the endpoint egress policy). By default Calico - blocks traffic from workload endpoints to the host itself with an - iptables “DROP” action. If you want to allow some or all traffic - from endpoint to host, set this parameter to RETURN or ACCEPT. Use - RETURN if you have your own rules in the iptables “INPUT” chain; - Calico will insert its rules at the top of that chain, then “RETURN” - packets to the “INPUT” chain once it has completed processing workload - endpoint egress policy. Use ACCEPT to unconditionally accept packets - from workloads after processing workload endpoint egress policy. - [Default: Drop]' - type: string - deviceRouteProtocol: - description: This defines the route protocol added to programmed device - routes, by default this will be RTPROT_BOOT when left blank. - type: integer - deviceRouteSourceAddress: - description: This is the source address to use on programmed device - routes. By default the source address is left blank, leaving the - kernel to choose the source address used. - type: string - disableConntrackInvalidCheck: - type: boolean - endpointReportingDelay: - type: string - endpointReportingEnabled: - type: boolean - externalNodesList: - description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes - which may source tunnel traffic and have the tunneled traffic be - accepted at calico nodes. - items: - type: string - type: array - failsafeInboundHostPorts: - description: 'FailsafeInboundHostPorts is a comma-delimited list of - UDP/TCP ports that Felix will allow incoming traffic to host endpoints - on irrespective of the security policy. This is useful to avoid - accidentally cutting off a host with incorrect configuration. Each - port should be specified as tcp: or udp:. - For back-compatibility, if the protocol is not specified, it defaults - to “tcp”. To disable all inbound host ports, use the value none. - The default value allows ssh access and DHCP. [Default: tcp:22, - udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]' - items: - description: ProtoPort is combination of protocol and port, both - must be specified. - properties: - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - failsafeOutboundHostPorts: - description: 'FailsafeOutboundHostPorts is a comma-delimited list - of UDP/TCP ports that Felix will allow outgoing traffic from host - endpoints to irrespective of the security policy. This is useful - to avoid accidentally cutting off a host with incorrect configuration. - Each port should be specified as tcp: or udp:. - For back-compatibility, if the protocol is not specified, it defaults - to “tcp”. To disable all outbound host ports, use the value none. - The default value opens etcd’s standard ports to ensure that Felix - does not get cut off from etcd as well as allowing DHCP and DNS. - [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667, - udp:53, udp:67]' - items: - description: ProtoPort is combination of protocol and port, both - must be specified. - properties: - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - genericXDPEnabled: - description: 'GenericXDPEnabled enables Generic XDP so network cards - that don''t support XDP offload or driver modes can use XDP. This - is not recommended since it doesn''t provide better performance - than iptables. [Default: false]' - type: boolean - healthEnabled: - type: boolean - healthHost: - type: string - healthPort: - type: integer - interfaceExclude: - description: 'InterfaceExclude is a comma-separated list of interfaces - that Felix should exclude when monitoring for host endpoints. The - default value ensures that Felix ignores Kubernetes'' IPVS dummy - interface, which is used internally by kube-proxy. If you want to - exclude multiple interface names using a single value, the list - supports regular expressions. For regular expressions you must wrap - the value with ''/''. For example having values ''/^kube/,veth1'' - will exclude all interfaces that begin with ''kube'' and also the - interface ''veth1''. [Default: kube-ipvs0]' - type: string - interfacePrefix: - description: 'InterfacePrefix is the interface name prefix that identifies - workload endpoints and so distinguishes them from host endpoint - interfaces. Note: in environments other than bare metal, the orchestrators - configure this appropriately. For example our Kubernetes and Docker - integrations set the ‘cali’ value, and our OpenStack integration - sets the ‘tap’ value. [Default: cali]' - type: string - ipipEnabled: - type: boolean - ipipMTU: - description: 'IPIPMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - ipsetsRefreshInterval: - description: 'IpsetsRefreshInterval is the period at which Felix re-checks - all iptables state to ensure that no other process has accidentally - broken Calico’s rules. Set to 0 to disable iptables refresh. [Default: - 90s]' - type: string - iptablesBackend: - description: IptablesBackend specifies which backend of iptables will - be used. The default is legacy. - type: string - iptablesFilterAllowAction: - type: string - iptablesLockFilePath: - description: 'IptablesLockFilePath is the location of the iptables - lock file. You may need to change this if the lock file is not in - its standard location (for example if you have mapped it into Felix’s - container at a different path). [Default: /run/xtables.lock]' - type: string - iptablesLockProbeInterval: - description: 'IptablesLockProbeInterval is the time that Felix will - wait between attempts to acquire the iptables lock if it is not - available. Lower values make Felix more responsive when the lock - is contended, but use more CPU. [Default: 50ms]' - type: string - iptablesLockTimeout: - description: 'IptablesLockTimeout is the time that Felix will wait - for the iptables lock, or 0, to disable. To use this feature, Felix - must share the iptables lock file with all other processes that - also take the lock. When running Felix inside a container, this - requires the /run directory of the host to be mounted into the calico/node - or calico/felix container. [Default: 0s disabled]' - type: string - iptablesMangleAllowAction: - type: string - iptablesMarkMask: - description: 'IptablesMarkMask is the mask that Felix selects its - IPTables Mark bits from. Should be a 32 bit hexadecimal number with - at least 8 bits set, none of which clash with any other mark bits - in use on the system. [Default: 0xff000000]' - format: int32 - type: integer - iptablesNATOutgoingInterfaceFilter: - type: string - iptablesPostWriteCheckInterval: - description: 'IptablesPostWriteCheckInterval is the period after Felix - has done a write to the dataplane that it schedules an extra read - back in order to check the write was not clobbered by another process. - This should only occur if another application on the system doesn’t - respect the iptables lock. [Default: 1s]' - type: string - iptablesRefreshInterval: - description: 'IptablesRefreshInterval is the period at which Felix - re-checks the IP sets in the dataplane to ensure that no other process - has accidentally broken Calico’s rules. Set to 0 to disable IP sets - refresh. Note: the default for this value is lower than the other - refresh intervals as a workaround for a Linux kernel bug that was - fixed in kernel version 4.11. If you are using v4.11 or greater - you may want to set this to, a higher value to reduce Felix CPU - usage. [Default: 10s]' - type: string - ipv6Support: - type: boolean - kubeNodePortRanges: - description: 'KubeNodePortRanges holds list of port ranges used for - service node ports. Only used if felix detects kube-proxy running - in ipvs mode. Felix uses these ranges to separate host and workload - traffic. [Default: 30000:32767].' - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - logFilePath: - description: 'LogFilePath is the full path to the Felix log. Set to - none to disable file logging. [Default: /var/log/calico/felix.log]' - type: string - logPrefix: - description: 'LogPrefix is the log prefix that Felix uses when rendering - LOG rules. [Default: calico-packet]' - type: string - logSeverityFile: - description: 'LogSeverityFile is the log severity above which logs - are sent to the log file. [Default: Info]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - logSeveritySys: - description: 'LogSeveritySys is the log severity above which logs - are sent to the syslog. Set to None for no logging to syslog. [Default: - Info]' - type: string - maxIpsetSize: - type: integer - metadataAddr: - description: 'MetadataAddr is the IP address or domain name of the - server that can answer VM queries for cloud-init metadata. In OpenStack, - this corresponds to the machine running nova-api (or in Ubuntu, - nova-api-metadata). A value of none (case insensitive) means that - Felix should not set up any NAT rule for the metadata path. [Default: - 127.0.0.1]' - type: string - metadataPort: - description: 'MetadataPort is the port of the metadata server. This, - combined with global.MetadataAddr (if not ‘None’), is used to set - up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. - In most cases this should not need to be changed [Default: 8775].' - type: integer - natOutgoingAddress: - description: NATOutgoingAddress specifies an address to use when performing - source NAT for traffic in a natOutgoing pool that is leaving the - network. By default the address used is an address on the interface - the traffic is leaving on (ie it uses the iptables MASQUERADE target) - type: string - natPortRange: - anyOf: - - type: integer - - type: string - description: NATPortRange specifies the range of ports that is used - for port mapping when doing outgoing NAT. When unset the default - behavior of the network stack is used. - pattern: ^.* - x-kubernetes-int-or-string: true - netlinkTimeout: - type: string - openstackRegion: - description: 'OpenstackRegion is the name of the region that a particular - Felix belongs to. In a multi-region Calico/OpenStack deployment, - this must be configured somehow for each Felix (here in the datamodel, - or in felix.cfg or the environment on each compute node), and must - match the [calico] openstack_region value configured in neutron.conf - on each node. [Default: Empty]' - type: string - policySyncPathPrefix: - description: 'PolicySyncPathPrefix is used to by Felix to communicate - policy changes to external services, like Application layer policy. - [Default: Empty]' - type: string - prometheusGoMetricsEnabled: - description: 'PrometheusGoMetricsEnabled disables Go runtime metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - prometheusMetricsEnabled: - description: 'PrometheusMetricsEnabled enables the Prometheus metrics - server in Felix if set to true. [Default: false]' - type: boolean - prometheusMetricsHost: - description: 'PrometheusMetricsHost is the host that the Prometheus - metrics server should bind to. [Default: empty]' - type: string - prometheusMetricsPort: - description: 'PrometheusMetricsPort is the TCP port that the Prometheus - metrics server should bind to. [Default: 9091]' - type: integer - prometheusProcessMetricsEnabled: - description: 'PrometheusProcessMetricsEnabled disables process metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - removeExternalRoutes: - description: Whether or not to remove device routes that have not - been programmed by Felix. Disabling this will allow external applications - to also add device routes. This is enabled by default which means - we will remove externally added routes. - type: boolean - reportingInterval: - description: 'ReportingInterval is the interval at which Felix reports - its status into the datastore or 0 to disable. Must be non-zero - in OpenStack deployments. [Default: 30s]' - type: string - reportingTTL: - description: 'ReportingTTL is the time-to-live setting for process-wide - status reports. [Default: 90s]' - type: string - routeRefreshInterval: - description: 'RouterefreshInterval is the period at which Felix re-checks - the routes in the dataplane to ensure that no other process has - accidentally broken Calico’s rules. Set to 0 to disable route refresh. - [Default: 90s]' - type: string - routeSource: - description: 'RouteSource configures where Felix gets its routing - information. - WorkloadIPs: use workload endpoints to construct - routes. - CalicoIPAM: the default - use IPAM data to construct routes.' - type: string - routeTableRange: - description: Calico programs additional Linux route tables for various - purposes. RouteTableRange specifies the indices of the route tables - that Calico should use. - properties: - max: - type: integer - min: - type: integer - required: - - max - - min - type: object - sidecarAccelerationEnabled: - description: 'SidecarAccelerationEnabled enables experimental sidecar - acceleration [Default: false]' - type: boolean - usageReportingEnabled: - description: 'UsageReportingEnabled reports anonymous Calico version - number and cluster size to projectcalico.org. Logs warnings returned - by the usage server. For example, if a significant security vulnerability - has been discovered in the version of Calico being used. [Default: - true]' - type: boolean - usageReportingInitialDelay: - description: 'UsageReportingInitialDelay controls the minimum delay - before Felix makes a report. [Default: 300s]' - type: string - usageReportingInterval: - description: 'UsageReportingInterval controls the interval at which - Felix makes reports. [Default: 86400s]' - type: string - useInternalDataplaneDriver: - type: boolean - vxlanEnabled: - type: boolean - vxlanMTU: - description: 'VXLANMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - vxlanPort: - type: integer - vxlanVNI: - type: integer - wireguardEnabled: - description: 'WireguardEnabled controls whether Wireguard is enabled. - [Default: false]' - type: boolean - wireguardInterfaceName: - description: 'WireguardInterfaceName specifies the name to use for - the Wireguard interface. [Default: wg.calico]' - type: string - wireguardListeningPort: - description: 'WireguardListeningPort controls the listening port used - by Wireguard. [Default: 51820]' - type: integer - wireguardMTU: - description: 'WireguardMTU controls the MTU on the Wireguard interface. - See Configuring MTU [Default: 1420]' - type: integer - wireguardRoutingRulePriority: - description: 'WireguardRoutingRulePriority controls the priority value - to use for the Wireguard routing rule. [Default: 99]' - type: integer - xdpEnabled: - description: 'XDPEnabled enables XDP acceleration for suitable untracked - incoming deny rules. [Default: true]' - type: boolean - xdpRefreshInterval: - description: 'XDPRefreshInterval is the period at which Felix re-checks - all XDP state to ensure that no other process has accidentally broken - Calico''s BPF maps or attached programs. Set to 0 to disable XDP - refresh. [Default: 90s]' - type: string - required: - - bpfLogLevel - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: globalnetworkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkPolicy - listKind: GlobalNetworkPolicyList - plural: globalnetworkpolicies - singular: globalnetworkpolicy - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - applyOnForward: - description: ApplyOnForward indicates to apply the rules in this policy - on forward traffic. - type: boolean - doNotTrack: - description: DoNotTrack indicates whether packets matched by the rules - in this policy should go through the data plane's connection tracking, - such as Linux conntrack. If True, the rules in this policy are - applied before any data plane connection tracking, and packets allowed - by this policy are marked as not to be tracked. - type: boolean - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - namespaceSelector: - description: NamespaceSelector is an optional field for an expression - used to select a pod based on namespaces. - type: string - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - preDNAT: - description: PreDNAT indicates to apply the rules in this policy before - any DNAT. - type: boolean - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress rules are present in the policy. The - default is: \n - [ PolicyTypeIngress ], if there are no Egress rules - (including the case where there are also no Ingress rules) \n - - [ PolicyTypeEgress ], if there are Egress rules but no Ingress - rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are - both Ingress and Egress rules. \n When the policy is read back again, - Types will always be one of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: globalnetworksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkSet - listKind: GlobalNetworkSetList - plural: globalnetworksets - singular: globalnetworkset - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs - that share labels to allow rules to refer to them via selectors. The labels - of GlobalNetworkSet are not namespaced. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: GlobalNetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: hostendpoints.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: HostEndpoint - listKind: HostEndpointList - plural: hostendpoints - singular: hostendpoint - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: HostEndpointSpec contains the specification for a HostEndpoint - resource. - properties: - expectedIPs: - description: "The expected IP addresses (IPv4 and IPv6) of the endpoint. - If \"InterfaceName\" is not present, Calico will look for an interface - matching any of the IPs in the list and apply policy to that. Note: - \tWhen using the selector match criteria in an ingress or egress - security Policy \tor Profile, Calico converts the selector into - a set of IP addresses. For host \tendpoints, the ExpectedIPs field - is used for that purpose. (If only the interface \tname is specified, - Calico does not learn the IPs of the interface for use in match - \tcriteria.)" - items: - type: string - type: array - interfaceName: - description: "Either \"*\", or the name of a specific Linux interface - to apply policy to; or empty. \"*\" indicates that this HostEndpoint - governs all traffic to, from or through the default network namespace - of the host named by the \"Node\" field; entering and leaving that - namespace via any interface, including those from/to non-host-networked - local workloads. \n If InterfaceName is not \"*\", this HostEndpoint - only governs traffic that enters or leaves the host through the - specific interface named by InterfaceName, or - when InterfaceName - is empty - through the specific interface that has one of the IPs - in ExpectedIPs. Therefore, when InterfaceName is empty, at least - one expected IP must be specified. Only external interfaces (such - as “eth0”) are supported here; it isn't possible for a HostEndpoint - to protect traffic through a specific local workload interface. - \n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints; - initially just pre-DNAT policy. Please check Calico documentation - for the latest position." - type: string - node: - description: The node name identifying the Calico node instance. - type: string - ports: - description: Ports contains the endpoint's named ports, which may - be referenced in security policy rules. - items: - properties: - name: - type: string - port: - type: integer - protocol: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - required: - - name - - port - - protocol - type: object - type: array - profiles: - description: A list of identifiers of security Profile objects that - apply to this endpoint. Each profile is applied in the order that - they appear in this list. Profile rules are applied after the selector-based - security policy. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamblocks.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMBlock - listKind: IPAMBlockList - plural: ipamblocks - singular: ipamblock - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMBlockSpec contains the specification for an IPAMBlock - resource. - properties: - affinity: - type: string - allocations: - items: - type: integer - # TODO: This nullable is manually added in. We should update controller-gen - # to handle []*int properly itself. - nullable: true - type: array - attributes: - items: - properties: - handle_id: - type: string - secondary: - additionalProperties: - type: string - type: object - type: object - type: array - cidr: - type: string - deleted: - type: boolean - strictAffinity: - type: boolean - unallocated: - items: - type: integer - type: array - required: - - allocations - - attributes - - cidr - - deleted - - strictAffinity - - unallocated - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamconfigs.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMConfig - listKind: IPAMConfigList - plural: ipamconfigs - singular: ipamconfig - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMConfigSpec contains the specification for an IPAMConfig - resource. - properties: - autoAllocateBlocks: - type: boolean - strictAffinity: - type: boolean - required: - - autoAllocateBlocks - - strictAffinity - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamhandles.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMHandle - listKind: IPAMHandleList - plural: ipamhandles - singular: ipamhandle - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMHandleSpec contains the specification for an IPAMHandle - resource. - properties: - block: - additionalProperties: - type: integer - type: object - handleID: - type: string - required: - - block - - handleID - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ippools.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPPool - listKind: IPPoolList - plural: ippools - singular: ippool - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPPoolSpec contains the specification for an IPPool resource. - properties: - blockSize: - description: The block size to use for IP address assignments from - this pool. Defaults to 26 for IPv4 and 112 for IPv6. - type: integer - cidr: - description: The pool CIDR. - type: string - disabled: - description: When disabled is true, Calico IPAM will not assign addresses - from this pool. - type: boolean - ipip: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - properties: - enabled: - description: When enabled is true, ipip tunneling will be used - to deliver packets to destinations within this pool. - type: boolean - mode: - description: The IPIP mode. This can be one of "always" or "cross-subnet". A - mode of "always" will also use IPIP tunneling for routing to - destination IP addresses within this pool. A mode of "cross-subnet" - will only use IPIP tunneling when the destination node is on - a different subnet to the originating node. The default value - (if not specified) is "always". - type: string - type: object - ipipMode: - description: Contains configuration for IPIP tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. IPIP tunelling - is disabled). - type: string - nat-outgoing: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - type: boolean - natOutgoing: - description: When nat-outgoing is true, packets sent from Calico networked - containers in this pool to destinations outside of this pool will - be masqueraded. - type: boolean - nodeSelector: - description: Allows IPPool to allocate for a specific node by label - selector. - type: string - vxlanMode: - description: Contains configuration for VXLAN tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. VXLAN - tunelling is disabled). - type: string - required: - - cidr - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: kubecontrollersconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: KubeControllersConfiguration - listKind: KubeControllersConfigurationList - plural: kubecontrollersconfigurations - singular: kubecontrollersconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: KubeControllersConfigurationSpec contains the values of the - Kubernetes controllers configuration. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host endpoints. - Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation of - host endpoints for every node. [Default: Disabled]' - type: string - type: object - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - type: object - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - required: - - controllers - type: object - status: - description: KubeControllersConfigurationStatus represents the status - of the configuration. It's useful for admins to be able to see the actual - config that was applied, which can be modified by environment variables - on the kube-controllers process. - properties: - environmentVars: - additionalProperties: - type: string - description: EnvironmentVars contains the environment variables on - the kube-controllers that influenced the RunningConfig. - type: object - runningConfig: - description: RunningConfig contains the effective config that is running - in the kube-controllers pod, after merging the API resource with - any environment variables. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace - controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host - endpoints. Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation - of host endpoints for every node. [Default: Disabled]' - type: string - type: object - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - type: object - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which - logs are sent to the stdout. [Default: Info]' - type: string - required: - - controllers - type: object - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: networkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkPolicy - listKind: NetworkPolicyList - plural: networkpolicies - singular: networkpolicy - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress are present in the policy. The default - is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including - the case where there are also no Ingress rules) \n - [ PolicyTypeEgress - ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, - PolicyTypeEgress ], if there are both Ingress and Egress rules. - \n When the policy is read back again, Types will always be one - of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: networksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkSet - listKind: NetworkSetList - plural: networksets - singular: networkset - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: NetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- ---- -# Source: calico/templates/calico-kube-controllers-rbac.yaml - -# Include a clusterrole for the kube-controllers component, -# and bind it to the calico-kube-controllers serviceaccount. -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-kube-controllers -rules: - # Nodes are watched to monitor for deletions. - - apiGroups: [""] - resources: - - nodes - verbs: - - watch - - list - - get - # Pods are queried to check for existence. - - apiGroups: [""] - resources: - - pods - verbs: - - get - # IPAM resources are manipulated when nodes are deleted. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ippools - verbs: - - list - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - - ipamblocks - - ipamhandles - verbs: - - get - - list - - create - - update - - delete - # kube-controllers manages hostendpoints. - - apiGroups: ["crd.projectcalico.org"] - resources: - - hostendpoints - verbs: - - get - - list - - create - - update - - delete - # Needs access to update clusterinformations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - clusterinformations - verbs: - - get - - create - - update - # KubeControllersConfiguration is where it gets its config - - apiGroups: ["crd.projectcalico.org"] - resources: - - kubecontrollersconfigurations - verbs: - # read its own config - - get - # create a default if none exists - - create - # update status - - update - # watch for changes - - watch ---- -kind: ClusterRoleBinding -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-kube-controllers -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: calico-kube-controllers -subjects: -- kind: ServiceAccount - name: calico-kube-controllers - namespace: kube-system ---- - ---- -# Source: calico/templates/calico-node-rbac.yaml -# Include a clusterrole for the calico-node DaemonSet, -# and bind it to the calico-node serviceaccount. -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-node -rules: - # The CNI plugin needs to get pods, nodes, and namespaces. - - apiGroups: [""] - resources: - - pods - - nodes - - namespaces - verbs: - - get - - apiGroups: [""] - resources: - - endpoints - - services - verbs: - # Used to discover service IPs for advertisement. - - watch - - list - # Used to discover Typhas. - - get - # Pod CIDR auto-detection on kubeadm needs access to config maps. - - apiGroups: [""] - resources: - - configmaps - verbs: - - get - - apiGroups: [""] - resources: - - nodes/status - verbs: - # Needed for clearing NodeNetworkUnavailable flag. - - patch - # Calico stores some configuration information in node annotations. - - update - # Watch for changes to Kubernetes NetworkPolicies. - - apiGroups: ["networking.k8s.io"] - resources: - - networkpolicies - verbs: - - watch - - list - # Used by Calico for policy information. - - apiGroups: [""] - resources: - - pods - - namespaces - - serviceaccounts - verbs: - - list - - watch - # The CNI plugin patches pods/status. - - apiGroups: [""] - resources: - - pods/status - verbs: - - patch - # Calico monitors various CRDs for config. - - apiGroups: ["crd.projectcalico.org"] - resources: - - globalfelixconfigs - - felixconfigurations - - bgppeers - - globalbgpconfigs - - bgpconfigurations - - ippools - - ipamblocks - - globalnetworkpolicies - - globalnetworksets - - networkpolicies - - networksets - - clusterinformations - - hostendpoints - - blockaffinities - verbs: - - get - - list - - watch - # Calico must create and update some CRDs on startup. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ippools - - felixconfigurations - - clusterinformations - verbs: - - create - - update - # Calico stores some configuration information on the node. - - apiGroups: [""] - resources: - - nodes - verbs: - - get - - list - - watch - # These permissions are only required for upgrade from v2.6, and can - # be removed after upgrade or on fresh installations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - bgpconfigurations - - bgppeers - verbs: - - create - - update - # These permissions are required for Calico CNI to perform IPAM allocations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - - ipamblocks - - ipamhandles - verbs: - - get - - list - - create - - update - - delete - - apiGroups: ["crd.projectcalico.org"] - resources: - - ipamconfigs - verbs: - - get - # Block affinities must also be watchable by confd for route aggregation. - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - verbs: - - watch - # The Calico IPAM migration needs to get daemonsets. These permissions can be - # removed if not upgrading from an installation using host-local IPAM. - - apiGroups: ["apps"] - resources: - - daemonsets - verbs: - - get - ---- -apiVersion: rbac.authorization.k8s.io/v1 -kind: ClusterRoleBinding -metadata: - name: calico-node -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: calico-node -subjects: -- kind: ServiceAccount - name: calico-node - namespace: kube-system - ---- -# Source: calico/templates/calico-node.yaml -# This manifest installs the calico-node container, as well -# as the CNI plugins and network config on -# each master and worker node in a Kubernetes cluster. -kind: DaemonSet -apiVersion: apps/v1 -metadata: - name: calico-node - namespace: kube-system - labels: - k8s-app: calico-node -spec: - selector: - matchLabels: - k8s-app: calico-node - updateStrategy: - type: RollingUpdate - rollingUpdate: - maxUnavailable: 1 - template: - metadata: - labels: - k8s-app: calico-node - spec: - nodeSelector: - kubernetes.io/os: linux - hostNetwork: true - tolerations: - # Make sure calico-node gets scheduled on all nodes. - - effect: NoSchedule - operator: Exists - # Mark the pod as a critical add-on for rescheduling. - - key: CriticalAddonsOnly - operator: Exists - - effect: NoExecute - operator: Exists - serviceAccountName: calico-node - # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force - # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. - terminationGracePeriodSeconds: 0 - priorityClassName: system-node-critical - initContainers: - # This container installs the CNI binaries - # and CNI network config file on each node. - - name: install-cni - image: calico/cni:v3.15.0 - command: ["/install-cni.sh"] - env: - # Name of the CNI config file to create. - - name: CNI_CONF_NAME - value: "10-calico.conflist" - # The CNI network config to install on each node. - - name: CNI_NETWORK_CONFIG - valueFrom: - configMapKeyRef: - name: calico-config - key: cni_network_config - # Set the hostname based on the k8s node name. - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - # CNI MTU Config variable - - name: CNI_MTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Prevents the container from sleeping forever. - - name: SLEEP - value: "false" - volumeMounts: - - mountPath: /host/opt/cni/bin - name: cni-bin-dir - - mountPath: /host/etc/cni/net.d - name: cni-net-dir - securityContext: - privileged: true - # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes - # to communicate with Felix over the Policy Sync API. - - name: flexvol-driver - image: calico/pod2daemon-flexvol:v3.15.0 - volumeMounts: - - name: flexvol-driver-host - mountPath: /host/driver - securityContext: - privileged: true - containers: - # Runs calico-node container on each Kubernetes node. This - # container programs network policy and routes on each - # host. - - name: calico-node - image: calico/node:v3.15.0 - env: - # Use Kubernetes API as the backing datastore. - - name: DATASTORE_TYPE - value: "kubernetes" - # Wait for the datastore. - - name: WAIT_FOR_DATASTORE - value: "true" - # Set based on the k8s node name. - - name: NODENAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - # Choose the backend to use. - - name: CALICO_NETWORKING_BACKEND - valueFrom: - configMapKeyRef: - name: calico-config - key: calico_backend - # Cluster type to identify the deployment type - - name: CLUSTER_TYPE - value: "k8s,kubeadm" - # Auto-detect the BGP IP address. - - name: IP - value: "autodetect" - # Enable IPIP - - name: CALICO_IPV4POOL_IPIP - value: "Never" - # Enable or Disable VXLAN on the default IP pool. - - name: CALICO_IPV4POOL_VXLAN - value: "Always" - # Set MTU for tunnel device used if ipip is enabled - - name: FELIX_IPINIPMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Set MTU for the VXLAN tunnel device. - - name: FELIX_VXLANMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Set MTU for the Wireguard tunnel device. - - name: FELIX_WIREGUARDMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # The default IPv4 pool to create on startup if none exists. Pod IPs will be - # chosen from this range. Changing this value after installation will have - # no effect. This should fall within `--cluster-cidr`. - # - name: CALICO_IPV4POOL_CIDR - # value: "192.168.0.0/16" - # Set MTU for the Wireguard tunnel device. - - name: FELIX_WIREGUARDMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Disable file logging so `kubectl logs` works. - - name: CALICO_DISABLE_FILE_LOGGING - value: "true" - # Set Felix endpoint to host default action to ACCEPT. - - name: FELIX_DEFAULTENDPOINTTOHOSTACTION - value: "ACCEPT" - # Disable IPv6 on Kubernetes. - - name: FELIX_IPV6SUPPORT - value: "false" - # Set Felix logging to "info" - - name: FELIX_LOGSEVERITYSCREEN - value: "Warning" - - name: FELIX_LOGSEVERITYFILE - value: "Warning" - - name: FELIX_LOGSEVERITYSYS - value: "" - - name: FELIX_HEALTHENABLED - value: "true" - - name: FELIX_PROMETHEUSGOMETRICSENABLED - value: "false" - - name: FELIX_PROMETHEUSMETRICSENABLED - value: "true" - securityContext: - privileged: true - resources: - requests: - cpu: 250m - livenessProbe: - exec: - command: - - /bin/calico-node - - -felix-live - periodSeconds: 10 - initialDelaySeconds: 10 - failureThreshold: 6 - readinessProbe: - exec: - command: - - /bin/calico-node - - -felix-ready - periodSeconds: 10 - volumeMounts: - - mountPath: /lib/modules - name: lib-modules - readOnly: true - - mountPath: /run/xtables.lock - name: xtables-lock - readOnly: false - - mountPath: /var/run/calico - name: var-run-calico - readOnly: false - - mountPath: /var/lib/calico - name: var-lib-calico - readOnly: false - - name: policysync - mountPath: /var/run/nodeagent - volumes: - # Used by calico-node. - - name: lib-modules - hostPath: - path: /lib/modules - - name: var-run-calico - hostPath: - path: /var/run/calico - - name: var-lib-calico - hostPath: - path: /var/lib/calico - - name: xtables-lock - hostPath: - path: /run/xtables.lock - type: FileOrCreate - # Used to install CNI. - - name: cni-bin-dir - hostPath: - path: /opt/cni/bin - - name: cni-net-dir - hostPath: - path: /etc/cni/net.d - # Mount in the directory for host-local IPAM allocations. This is - # used when upgrading from host-local to calico-ipam, and can be removed - # if not using the upgrade-ipam init container. - - name: host-local-net-dir - hostPath: - path: /var/lib/cni/networks - # Used to create per-pod Unix Domain Sockets - - name: policysync - hostPath: - type: DirectoryOrCreate - path: /var/run/nodeagent - # Used to install Flex Volume Driver - - name: flexvol-driver-host - hostPath: - type: DirectoryOrCreate - path: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds ---- - -apiVersion: v1 -kind: ServiceAccount -metadata: - name: calico-node - namespace: kube-system - ---- -# Source: calico/templates/calico-kube-controllers.yaml -# See https://github.com/projectcalico/kube-controllers -apiVersion: apps/v1 -kind: Deployment -metadata: - name: calico-kube-controllers - namespace: kube-system - labels: - k8s-app: calico-kube-controllers -spec: - # The controllers can only have a single active instance. - replicas: 1 - selector: - matchLabels: - k8s-app: calico-kube-controllers - strategy: - type: Recreate - template: - metadata: - name: calico-kube-controllers - namespace: kube-system - labels: - k8s-app: calico-kube-controllers - spec: - nodeSelector: - kubernetes.io/os: linux - tolerations: - # Mark the pod as a critical add-on for rescheduling. - - key: CriticalAddonsOnly - operator: Exists - - key: node-role.kubernetes.io/master - effect: NoSchedule - serviceAccountName: calico-kube-controllers - priorityClassName: system-cluster-critical - containers: - - name: calico-kube-controllers - image: calico/kube-controllers:v3.15.0 - env: - # Choose which controllers to run. - - name: ENABLED_CONTROLLERS - value: node - - name: DATASTORE_TYPE - value: kubernetes - readinessProbe: - exec: - command: - - /usr/bin/check-status - - -r - ---- - -apiVersion: v1 -kind: ServiceAccount -metadata: - name: calico-kube-controllers - namespace: kube-system - ---- -# Source: calico/templates/calico-etcd-secrets.yaml - ---- -# Source: calico/templates/calico-typha.yaml - ---- -# Source: calico/templates/configure-canal.yaml - - diff --git a/artifacts/kubezero-calico/canal.yaml b/artifacts/kubezero-calico/canal.yaml deleted file mode 100644 index ac806f5d..00000000 --- a/artifacts/kubezero-calico/canal.yaml +++ /dev/null @@ -1,3749 +0,0 @@ ---- -# Source: calico/templates/calico-config.yaml -# This ConfigMap is used to configure a self-hosted Canal installation. -kind: ConfigMap -apiVersion: v1 -metadata: - name: canal-config -data: - # Typha is disabled. - typha_service_name: "none" - # The interface used by canal for host <-> host communication. - # If left blank, then the interface is chosen using the node's - # default route. - canal_iface: "" - - # Whether or not to masquerade traffic to destinations not within - # the pod network. - masquerade: "true" - - # Configure the MTU to use - veth_mtu: "1450" - - # The CNI network configuration to install on each node. The special - # values in this config will be automatically populated. - cni_network_config: |- - { - "name": "k8s-pod-network", - "cniVersion": "0.3.1", - "plugins": [ - { - "type": "calico", - "log_level": "info", - "datastore_type": "kubernetes", - "nodename": "__KUBERNETES_NODE_NAME__", - "mtu": __CNI_MTU__, - "ipam": { - "type": "host-local", - "subnet": "usePodCidr" - }, - "policy": { - "type": "k8s" - }, - "kubernetes": { - "kubeconfig": "__KUBECONFIG_FILEPATH__" - } - }, - { - "type": "portmap", - "snat": true, - "capabilities": {"portMappings": true} - }, - { - "type": "bandwidth", - "capabilities": {"bandwidth": true} - } - ] - } - - # Flannel network configuration. Mounted into the flannel container. - net-conf.json: | - { - "Network": "10.244.0.0/16", - "Backend": { - "Type": "vxlan" - } - } - ---- -# Source: calico/templates/kdd-crds.yaml - - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: bgpconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPConfiguration - listKind: BGPConfigurationList - plural: bgpconfigurations - singular: bgpconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: BGPConfiguration contains the configuration for any BGP routing. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPConfigurationSpec contains the values of the BGP configuration. - properties: - asNumber: - description: 'ASNumber is the default AS number used by a node. [Default: - 64512]' - format: int32 - type: integer - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: INFO]' - type: string - nodeToNodeMeshEnabled: - description: 'NodeToNodeMeshEnabled sets whether full node to node - BGP mesh is enabled. [Default: true]' - type: boolean - serviceClusterIPs: - description: ServiceClusterIPs are the CIDR blocks from which service - cluster IPs are allocated. If specified, Calico will advertise these - blocks, as well as any cluster IPs within them. - items: - description: ServiceClusterIPBlock represents a single whitelisted - CIDR block for ClusterIPs. - properties: - cidr: - type: string - type: object - type: array - serviceExternalIPs: - description: ServiceExternalIPs are the CIDR blocks for Kubernetes - Service External IPs. Kubernetes Service ExternalIPs will only be - advertised if they are within one of these blocks. - items: - description: ServiceExternalIPBlock represents a single whitelisted - CIDR External IP block. - properties: - cidr: - type: string - type: object - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: bgppeers.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPPeer - listKind: BGPPeerList - plural: bgppeers - singular: bgppeer - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPPeerSpec contains the specification for a BGPPeer resource. - properties: - asNumber: - description: The AS Number of the peer. - format: int32 - type: integer - node: - description: The node name identifying the Calico node instance that - is peering with this peer. If this is not set, this represents a - global peer, i.e. a peer that peers with every node in the deployment. - type: string - nodeSelector: - description: Selector for the nodes that should have this peering. When - this is set, the Node field must be empty. - type: string - peerIP: - description: The IP address of the peer. - type: string - peerSelector: - description: Selector for the remote nodes to peer with. When this - is set, the PeerIP and ASNumber fields must be empty. For each - peering between the local node and selected remote nodes, we configure - an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified, - and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The - remote AS number comes from the remote node’s NodeBGPSpec.ASNumber, - or the global default if that is not set. - type: string - required: - - asNumber - - peerIP - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: blockaffinities.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BlockAffinity - listKind: BlockAffinityList - plural: blockaffinities - singular: blockaffinity - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BlockAffinitySpec contains the specification for a BlockAffinity - resource. - properties: - cidr: - type: string - deleted: - description: Deleted indicates that this block affinity is being deleted. - This field is a string for compatibility with older releases that - mistakenly treat this field as a string. - type: string - node: - type: string - state: - type: string - required: - - cidr - - deleted - - node - - state - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: clusterinformations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: ClusterInformation - listKind: ClusterInformationList - plural: clusterinformations - singular: clusterinformation - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: ClusterInformation contains the cluster specific information. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: ClusterInformationSpec contains the values of describing - the cluster. - properties: - calicoVersion: - description: CalicoVersion is the version of Calico that the cluster - is running - type: string - clusterGUID: - description: ClusterGUID is the GUID of the cluster - type: string - clusterType: - description: ClusterType describes the type of the cluster - type: string - datastoreReady: - description: DatastoreReady is used during significant datastore migrations - to signal to components such as Felix that it should wait before - accessing the datastore. - type: boolean - variant: - description: Variant declares which variant of Calico should be active. - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: felixconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: FelixConfiguration - listKind: FelixConfigurationList - plural: felixconfigurations - singular: felixconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: Felix Configuration contains the configuration for Felix. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: FelixConfigurationSpec contains the values of the Felix configuration. - properties: - bpfConnectTimeLoadBalancingEnabled: - description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode, - controls whether Felix installs the connection-time load balancer. The - connect-time load balancer is required for the host to be able to - reach Kubernetes services and it improves the performance of pod-to-service - connections. The only reason to disable it is for debugging purposes. [Default: - true]' - type: boolean - bpfDataIfacePattern: - description: 'BPFDataIfacePattern is a regular expression that controls - which interfaces Felix should attach BPF programs to in order to - catch traffic to/from the network. This needs to match the interfaces - that Calico workload traffic flows over as well as any interfaces - that handle incoming traffic to nodeports and services from outside - the cluster. It should not match the workload interfaces (usually - named cali...). [Default: ^(en.*|eth.*|tunl0$)]' - type: string - bpfDisableUnprivileged: - description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled - sysctl to disable unprivileged use of BPF. This ensures that unprivileged - users cannot access Calico''s BPF maps and cannot insert their own - BPF programs to interfere with Calico''s. [Default: true]' - type: boolean - bpfEnabled: - description: 'BPFEnabled, if enabled Felix will use the BPF dataplane. - [Default: false]' - type: boolean - bpfExternalServiceMode: - description: 'BPFExternalServiceMode in BPF mode, controls how connections - from outside the cluster to services (node ports and cluster IPs) - are forwarded to remote workloads. If set to "Tunnel" then both - request and response traffic is tunneled to the remote node. If - set to "DSR", the request traffic is tunneled but the response traffic - is sent directly from the remote node. In "DSR" mode, the remote - node appears to use the IP of the ingress node; this requires a - permissive L2 network. [Default: Tunnel]' - type: string - bpfKubeProxyEndpointSlicesEnabled: - description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls - whether Felix's embedded kube-proxy accepts EndpointSlices or not. - type: boolean - bpfKubeProxyIptablesCleanupEnabled: - description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF - mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s - iptables chains. Should only be enabled if kube-proxy is not running. [Default: - true]' - type: boolean - bpfKubeProxyMinSyncPeriod: - description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the - minimum time between updates to the dataplane for Felix''s embedded - kube-proxy. Lower values give reduced set-up latency. Higher values - reduce Felix CPU usage by batching up more work. [Default: 1s]' - type: string - bpfLogLevel: - description: 'BPFLogLevel controls the log level of the BPF programs - when in BPF dataplane mode. One of "Off", "Info", or "Debug". The - logs are emitted to the BPF trace pipe, accessible with the command - `tc exec bpf debug`. [Default: Off].' - type: string - chainInsertMode: - description: 'ChainInsertMode controls whether Felix hooks the kernel’s - top-level iptables chains by inserting a rule at the top of the - chain or by appending a rule at the bottom. insert is the safe default - since it prevents Calico’s rules from being bypassed. If you switch - to append mode, be sure that the other rules in the chains signal - acceptance by falling through to the Calico rules, otherwise the - Calico policy will be bypassed. [Default: insert]' - type: string - dataplaneDriver: - type: string - debugDisableLogDropping: - type: boolean - debugMemoryProfilePath: - type: string - debugSimulateCalcGraphHangAfter: - type: string - debugSimulateDataplaneHangAfter: - type: string - defaultEndpointToHostAction: - description: 'DefaultEndpointToHostAction controls what happens to - traffic that goes from a workload endpoint to the host itself (after - the traffic hits the endpoint egress policy). By default Calico - blocks traffic from workload endpoints to the host itself with an - iptables “DROP” action. If you want to allow some or all traffic - from endpoint to host, set this parameter to RETURN or ACCEPT. Use - RETURN if you have your own rules in the iptables “INPUT” chain; - Calico will insert its rules at the top of that chain, then “RETURN” - packets to the “INPUT” chain once it has completed processing workload - endpoint egress policy. Use ACCEPT to unconditionally accept packets - from workloads after processing workload endpoint egress policy. - [Default: Drop]' - type: string - deviceRouteProtocol: - description: This defines the route protocol added to programmed device - routes, by default this will be RTPROT_BOOT when left blank. - type: integer - deviceRouteSourceAddress: - description: This is the source address to use on programmed device - routes. By default the source address is left blank, leaving the - kernel to choose the source address used. - type: string - disableConntrackInvalidCheck: - type: boolean - endpointReportingDelay: - type: string - endpointReportingEnabled: - type: boolean - externalNodesList: - description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes - which may source tunnel traffic and have the tunneled traffic be - accepted at calico nodes. - items: - type: string - type: array - failsafeInboundHostPorts: - description: 'FailsafeInboundHostPorts is a comma-delimited list of - UDP/TCP ports that Felix will allow incoming traffic to host endpoints - on irrespective of the security policy. This is useful to avoid - accidentally cutting off a host with incorrect configuration. Each - port should be specified as tcp: or udp:. - For back-compatibility, if the protocol is not specified, it defaults - to “tcp”. To disable all inbound host ports, use the value none. - The default value allows ssh access and DHCP. [Default: tcp:22, - udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]' - items: - description: ProtoPort is combination of protocol and port, both - must be specified. - properties: - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - failsafeOutboundHostPorts: - description: 'FailsafeOutboundHostPorts is a comma-delimited list - of UDP/TCP ports that Felix will allow outgoing traffic from host - endpoints to irrespective of the security policy. This is useful - to avoid accidentally cutting off a host with incorrect configuration. - Each port should be specified as tcp: or udp:. - For back-compatibility, if the protocol is not specified, it defaults - to “tcp”. To disable all outbound host ports, use the value none. - The default value opens etcd’s standard ports to ensure that Felix - does not get cut off from etcd as well as allowing DHCP and DNS. - [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667, - udp:53, udp:67]' - items: - description: ProtoPort is combination of protocol and port, both - must be specified. - properties: - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - genericXDPEnabled: - description: 'GenericXDPEnabled enables Generic XDP so network cards - that don''t support XDP offload or driver modes can use XDP. This - is not recommended since it doesn''t provide better performance - than iptables. [Default: false]' - type: boolean - healthEnabled: - type: boolean - healthHost: - type: string - healthPort: - type: integer - interfaceExclude: - description: 'InterfaceExclude is a comma-separated list of interfaces - that Felix should exclude when monitoring for host endpoints. The - default value ensures that Felix ignores Kubernetes'' IPVS dummy - interface, which is used internally by kube-proxy. If you want to - exclude multiple interface names using a single value, the list - supports regular expressions. For regular expressions you must wrap - the value with ''/''. For example having values ''/^kube/,veth1'' - will exclude all interfaces that begin with ''kube'' and also the - interface ''veth1''. [Default: kube-ipvs0]' - type: string - interfacePrefix: - description: 'InterfacePrefix is the interface name prefix that identifies - workload endpoints and so distinguishes them from host endpoint - interfaces. Note: in environments other than bare metal, the orchestrators - configure this appropriately. For example our Kubernetes and Docker - integrations set the ‘cali’ value, and our OpenStack integration - sets the ‘tap’ value. [Default: cali]' - type: string - ipipEnabled: - type: boolean - ipipMTU: - description: 'IPIPMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - ipsetsRefreshInterval: - description: 'IpsetsRefreshInterval is the period at which Felix re-checks - all iptables state to ensure that no other process has accidentally - broken Calico’s rules. Set to 0 to disable iptables refresh. [Default: - 90s]' - type: string - iptablesBackend: - description: IptablesBackend specifies which backend of iptables will - be used. The default is legacy. - type: string - iptablesFilterAllowAction: - type: string - iptablesLockFilePath: - description: 'IptablesLockFilePath is the location of the iptables - lock file. You may need to change this if the lock file is not in - its standard location (for example if you have mapped it into Felix’s - container at a different path). [Default: /run/xtables.lock]' - type: string - iptablesLockProbeInterval: - description: 'IptablesLockProbeInterval is the time that Felix will - wait between attempts to acquire the iptables lock if it is not - available. Lower values make Felix more responsive when the lock - is contended, but use more CPU. [Default: 50ms]' - type: string - iptablesLockTimeout: - description: 'IptablesLockTimeout is the time that Felix will wait - for the iptables lock, or 0, to disable. To use this feature, Felix - must share the iptables lock file with all other processes that - also take the lock. When running Felix inside a container, this - requires the /run directory of the host to be mounted into the calico/node - or calico/felix container. [Default: 0s disabled]' - type: string - iptablesMangleAllowAction: - type: string - iptablesMarkMask: - description: 'IptablesMarkMask is the mask that Felix selects its - IPTables Mark bits from. Should be a 32 bit hexadecimal number with - at least 8 bits set, none of which clash with any other mark bits - in use on the system. [Default: 0xff000000]' - format: int32 - type: integer - iptablesNATOutgoingInterfaceFilter: - type: string - iptablesPostWriteCheckInterval: - description: 'IptablesPostWriteCheckInterval is the period after Felix - has done a write to the dataplane that it schedules an extra read - back in order to check the write was not clobbered by another process. - This should only occur if another application on the system doesn’t - respect the iptables lock. [Default: 1s]' - type: string - iptablesRefreshInterval: - description: 'IptablesRefreshInterval is the period at which Felix - re-checks the IP sets in the dataplane to ensure that no other process - has accidentally broken Calico’s rules. Set to 0 to disable IP sets - refresh. Note: the default for this value is lower than the other - refresh intervals as a workaround for a Linux kernel bug that was - fixed in kernel version 4.11. If you are using v4.11 or greater - you may want to set this to, a higher value to reduce Felix CPU - usage. [Default: 10s]' - type: string - ipv6Support: - type: boolean - kubeNodePortRanges: - description: 'KubeNodePortRanges holds list of port ranges used for - service node ports. Only used if felix detects kube-proxy running - in ipvs mode. Felix uses these ranges to separate host and workload - traffic. [Default: 30000:32767].' - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - logFilePath: - description: 'LogFilePath is the full path to the Felix log. Set to - none to disable file logging. [Default: /var/log/calico/felix.log]' - type: string - logPrefix: - description: 'LogPrefix is the log prefix that Felix uses when rendering - LOG rules. [Default: calico-packet]' - type: string - logSeverityFile: - description: 'LogSeverityFile is the log severity above which logs - are sent to the log file. [Default: Info]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - logSeveritySys: - description: 'LogSeveritySys is the log severity above which logs - are sent to the syslog. Set to None for no logging to syslog. [Default: - Info]' - type: string - maxIpsetSize: - type: integer - metadataAddr: - description: 'MetadataAddr is the IP address or domain name of the - server that can answer VM queries for cloud-init metadata. In OpenStack, - this corresponds to the machine running nova-api (or in Ubuntu, - nova-api-metadata). A value of none (case insensitive) means that - Felix should not set up any NAT rule for the metadata path. [Default: - 127.0.0.1]' - type: string - metadataPort: - description: 'MetadataPort is the port of the metadata server. This, - combined with global.MetadataAddr (if not ‘None’), is used to set - up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. - In most cases this should not need to be changed [Default: 8775].' - type: integer - natOutgoingAddress: - description: NATOutgoingAddress specifies an address to use when performing - source NAT for traffic in a natOutgoing pool that is leaving the - network. By default the address used is an address on the interface - the traffic is leaving on (ie it uses the iptables MASQUERADE target) - type: string - natPortRange: - anyOf: - - type: integer - - type: string - description: NATPortRange specifies the range of ports that is used - for port mapping when doing outgoing NAT. When unset the default - behavior of the network stack is used. - pattern: ^.* - x-kubernetes-int-or-string: true - netlinkTimeout: - type: string - openstackRegion: - description: 'OpenstackRegion is the name of the region that a particular - Felix belongs to. In a multi-region Calico/OpenStack deployment, - this must be configured somehow for each Felix (here in the datamodel, - or in felix.cfg or the environment on each compute node), and must - match the [calico] openstack_region value configured in neutron.conf - on each node. [Default: Empty]' - type: string - policySyncPathPrefix: - description: 'PolicySyncPathPrefix is used to by Felix to communicate - policy changes to external services, like Application layer policy. - [Default: Empty]' - type: string - prometheusGoMetricsEnabled: - description: 'PrometheusGoMetricsEnabled disables Go runtime metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - prometheusMetricsEnabled: - description: 'PrometheusMetricsEnabled enables the Prometheus metrics - server in Felix if set to true. [Default: false]' - type: boolean - prometheusMetricsHost: - description: 'PrometheusMetricsHost is the host that the Prometheus - metrics server should bind to. [Default: empty]' - type: string - prometheusMetricsPort: - description: 'PrometheusMetricsPort is the TCP port that the Prometheus - metrics server should bind to. [Default: 9091]' - type: integer - prometheusProcessMetricsEnabled: - description: 'PrometheusProcessMetricsEnabled disables process metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - removeExternalRoutes: - description: Whether or not to remove device routes that have not - been programmed by Felix. Disabling this will allow external applications - to also add device routes. This is enabled by default which means - we will remove externally added routes. - type: boolean - reportingInterval: - description: 'ReportingInterval is the interval at which Felix reports - its status into the datastore or 0 to disable. Must be non-zero - in OpenStack deployments. [Default: 30s]' - type: string - reportingTTL: - description: 'ReportingTTL is the time-to-live setting for process-wide - status reports. [Default: 90s]' - type: string - routeRefreshInterval: - description: 'RouterefreshInterval is the period at which Felix re-checks - the routes in the dataplane to ensure that no other process has - accidentally broken Calico’s rules. Set to 0 to disable route refresh. - [Default: 90s]' - type: string - routeSource: - description: 'RouteSource configures where Felix gets its routing - information. - WorkloadIPs: use workload endpoints to construct - routes. - CalicoIPAM: the default - use IPAM data to construct routes.' - type: string - routeTableRange: - description: Calico programs additional Linux route tables for various - purposes. RouteTableRange specifies the indices of the route tables - that Calico should use. - properties: - max: - type: integer - min: - type: integer - required: - - max - - min - type: object - sidecarAccelerationEnabled: - description: 'SidecarAccelerationEnabled enables experimental sidecar - acceleration [Default: false]' - type: boolean - usageReportingEnabled: - description: 'UsageReportingEnabled reports anonymous Calico version - number and cluster size to projectcalico.org. Logs warnings returned - by the usage server. For example, if a significant security vulnerability - has been discovered in the version of Calico being used. [Default: - true]' - type: boolean - usageReportingInitialDelay: - description: 'UsageReportingInitialDelay controls the minimum delay - before Felix makes a report. [Default: 300s]' - type: string - usageReportingInterval: - description: 'UsageReportingInterval controls the interval at which - Felix makes reports. [Default: 86400s]' - type: string - useInternalDataplaneDriver: - type: boolean - vxlanEnabled: - type: boolean - vxlanMTU: - description: 'VXLANMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - vxlanPort: - type: integer - vxlanVNI: - type: integer - wireguardEnabled: - description: 'WireguardEnabled controls whether Wireguard is enabled. - [Default: false]' - type: boolean - wireguardInterfaceName: - description: 'WireguardInterfaceName specifies the name to use for - the Wireguard interface. [Default: wg.calico]' - type: string - wireguardListeningPort: - description: 'WireguardListeningPort controls the listening port used - by Wireguard. [Default: 51820]' - type: integer - wireguardMTU: - description: 'WireguardMTU controls the MTU on the Wireguard interface. - See Configuring MTU [Default: 1420]' - type: integer - wireguardRoutingRulePriority: - description: 'WireguardRoutingRulePriority controls the priority value - to use for the Wireguard routing rule. [Default: 99]' - type: integer - xdpEnabled: - description: 'XDPEnabled enables XDP acceleration for suitable untracked - incoming deny rules. [Default: true]' - type: boolean - xdpRefreshInterval: - description: 'XDPRefreshInterval is the period at which Felix re-checks - all XDP state to ensure that no other process has accidentally broken - Calico''s BPF maps or attached programs. Set to 0 to disable XDP - refresh. [Default: 90s]' - type: string - required: - - bpfLogLevel - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: globalnetworkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkPolicy - listKind: GlobalNetworkPolicyList - plural: globalnetworkpolicies - singular: globalnetworkpolicy - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - applyOnForward: - description: ApplyOnForward indicates to apply the rules in this policy - on forward traffic. - type: boolean - doNotTrack: - description: DoNotTrack indicates whether packets matched by the rules - in this policy should go through the data plane's connection tracking, - such as Linux conntrack. If True, the rules in this policy are - applied before any data plane connection tracking, and packets allowed - by this policy are marked as not to be tracked. - type: boolean - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - namespaceSelector: - description: NamespaceSelector is an optional field for an expression - used to select a pod based on namespaces. - type: string - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - preDNAT: - description: PreDNAT indicates to apply the rules in this policy before - any DNAT. - type: boolean - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress rules are present in the policy. The - default is: \n - [ PolicyTypeIngress ], if there are no Egress rules - (including the case where there are also no Ingress rules) \n - - [ PolicyTypeEgress ], if there are Egress rules but no Ingress - rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are - both Ingress and Egress rules. \n When the policy is read back again, - Types will always be one of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: globalnetworksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkSet - listKind: GlobalNetworkSetList - plural: globalnetworksets - singular: globalnetworkset - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs - that share labels to allow rules to refer to them via selectors. The labels - of GlobalNetworkSet are not namespaced. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: GlobalNetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: hostendpoints.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: HostEndpoint - listKind: HostEndpointList - plural: hostendpoints - singular: hostendpoint - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: HostEndpointSpec contains the specification for a HostEndpoint - resource. - properties: - expectedIPs: - description: "The expected IP addresses (IPv4 and IPv6) of the endpoint. - If \"InterfaceName\" is not present, Calico will look for an interface - matching any of the IPs in the list and apply policy to that. Note: - \tWhen using the selector match criteria in an ingress or egress - security Policy \tor Profile, Calico converts the selector into - a set of IP addresses. For host \tendpoints, the ExpectedIPs field - is used for that purpose. (If only the interface \tname is specified, - Calico does not learn the IPs of the interface for use in match - \tcriteria.)" - items: - type: string - type: array - interfaceName: - description: "Either \"*\", or the name of a specific Linux interface - to apply policy to; or empty. \"*\" indicates that this HostEndpoint - governs all traffic to, from or through the default network namespace - of the host named by the \"Node\" field; entering and leaving that - namespace via any interface, including those from/to non-host-networked - local workloads. \n If InterfaceName is not \"*\", this HostEndpoint - only governs traffic that enters or leaves the host through the - specific interface named by InterfaceName, or - when InterfaceName - is empty - through the specific interface that has one of the IPs - in ExpectedIPs. Therefore, when InterfaceName is empty, at least - one expected IP must be specified. Only external interfaces (such - as “eth0”) are supported here; it isn't possible for a HostEndpoint - to protect traffic through a specific local workload interface. - \n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints; - initially just pre-DNAT policy. Please check Calico documentation - for the latest position." - type: string - node: - description: The node name identifying the Calico node instance. - type: string - ports: - description: Ports contains the endpoint's named ports, which may - be referenced in security policy rules. - items: - properties: - name: - type: string - port: - type: integer - protocol: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - required: - - name - - port - - protocol - type: object - type: array - profiles: - description: A list of identifiers of security Profile objects that - apply to this endpoint. Each profile is applied in the order that - they appear in this list. Profile rules are applied after the selector-based - security policy. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamblocks.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMBlock - listKind: IPAMBlockList - plural: ipamblocks - singular: ipamblock - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMBlockSpec contains the specification for an IPAMBlock - resource. - properties: - affinity: - type: string - allocations: - items: - type: integer - # TODO: This nullable is manually added in. We should update controller-gen - # to handle []*int properly itself. - nullable: true - type: array - attributes: - items: - properties: - handle_id: - type: string - secondary: - additionalProperties: - type: string - type: object - type: object - type: array - cidr: - type: string - deleted: - type: boolean - strictAffinity: - type: boolean - unallocated: - items: - type: integer - type: array - required: - - allocations - - attributes - - cidr - - deleted - - strictAffinity - - unallocated - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamconfigs.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMConfig - listKind: IPAMConfigList - plural: ipamconfigs - singular: ipamconfig - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMConfigSpec contains the specification for an IPAMConfig - resource. - properties: - autoAllocateBlocks: - type: boolean - strictAffinity: - type: boolean - required: - - autoAllocateBlocks - - strictAffinity - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipamhandles.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMHandle - listKind: IPAMHandleList - plural: ipamhandles - singular: ipamhandle - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMHandleSpec contains the specification for an IPAMHandle - resource. - properties: - block: - additionalProperties: - type: integer - type: object - handleID: - type: string - required: - - block - - handleID - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ippools.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPPool - listKind: IPPoolList - plural: ippools - singular: ippool - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPPoolSpec contains the specification for an IPPool resource. - properties: - blockSize: - description: The block size to use for IP address assignments from - this pool. Defaults to 26 for IPv4 and 112 for IPv6. - type: integer - cidr: - description: The pool CIDR. - type: string - disabled: - description: When disabled is true, Calico IPAM will not assign addresses - from this pool. - type: boolean - ipip: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - properties: - enabled: - description: When enabled is true, ipip tunneling will be used - to deliver packets to destinations within this pool. - type: boolean - mode: - description: The IPIP mode. This can be one of "always" or "cross-subnet". A - mode of "always" will also use IPIP tunneling for routing to - destination IP addresses within this pool. A mode of "cross-subnet" - will only use IPIP tunneling when the destination node is on - a different subnet to the originating node. The default value - (if not specified) is "always". - type: string - type: object - ipipMode: - description: Contains configuration for IPIP tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. IPIP tunelling - is disabled). - type: string - nat-outgoing: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - type: boolean - natOutgoing: - description: When nat-outgoing is true, packets sent from Calico networked - containers in this pool to destinations outside of this pool will - be masqueraded. - type: boolean - nodeSelector: - description: Allows IPPool to allocate for a specific node by label - selector. - type: string - vxlanMode: - description: Contains configuration for VXLAN tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. VXLAN - tunelling is disabled). - type: string - required: - - cidr - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: kubecontrollersconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: KubeControllersConfiguration - listKind: KubeControllersConfigurationList - plural: kubecontrollersconfigurations - singular: kubecontrollersconfiguration - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: KubeControllersConfigurationSpec contains the values of the - Kubernetes controllers configuration. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host endpoints. - Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation of - host endpoints for every node. [Default: Disabled]' - type: string - type: object - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - type: object - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - required: - - controllers - type: object - status: - description: KubeControllersConfigurationStatus represents the status - of the configuration. It's useful for admins to be able to see the actual - config that was applied, which can be modified by environment variables - on the kube-controllers process. - properties: - environmentVars: - additionalProperties: - type: string - description: EnvironmentVars contains the environment variables on - the kube-controllers that influenced the RunningConfig. - type: object - runningConfig: - description: RunningConfig contains the effective config that is running - in the kube-controllers pod, after merging the API resource with - any environment variables. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace - controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host - endpoints. Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation - of host endpoints for every node. [Default: Disabled]' - type: string - type: object - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - type: object - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which - logs are sent to the stdout. [Default: Info]' - type: string - required: - - controllers - type: object - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: networkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkPolicy - listKind: NetworkPolicyList - plural: networkpolicies - singular: networkpolicy - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with ”Not”. All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel’s iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and Selector are defined on the same rule, then only workload - endpoints that are matched by both selectors will be selected - by the rule. \n For NetworkPolicy, an empty NamespaceSelector - implies that the Selector is limited to selecting only - workload endpoints in the same namespace as the NetworkPolicy. - \n For NetworkPolicy, `global()` NamespaceSelector implies - that the Selector is limited to selecting only GlobalNetworkSet - or HostEndpoint. \n For GlobalNetworkPolicy, an empty - NamespaceSelector implies the Selector applies to workload - endpoints across all namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label “my_label”. \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label “my_label”. - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - type: object - required: - - action - type: object - type: array - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress are present in the policy. The default - is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including - the case where there are also no Ingress rules) \n - [ PolicyTypeEgress - ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, - PolicyTypeEgress ], if there are both Ingress and Egress rules. - \n When the policy is read back again, Types will always be one - of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- - ---- -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: networksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkSet - listKind: NetworkSetList - plural: networksets - singular: networkset - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: NetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] - ---- ---- -# Source: calico/templates/calico-kube-controllers-rbac.yaml - -# Include a clusterrole for the kube-controllers component, -# and bind it to the calico-kube-controllers serviceaccount. -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-kube-controllers -rules: - # Nodes are watched to monitor for deletions. - - apiGroups: [""] - resources: - - nodes - verbs: - - watch - - list - - get - # Pods are queried to check for existence. - - apiGroups: [""] - resources: - - pods - verbs: - - get - # IPAM resources are manipulated when nodes are deleted. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ippools - verbs: - - list - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - - ipamblocks - - ipamhandles - verbs: - - get - - list - - create - - update - - delete - # kube-controllers manages hostendpoints. - - apiGroups: ["crd.projectcalico.org"] - resources: - - hostendpoints - verbs: - - get - - list - - create - - update - - delete - # Needs access to update clusterinformations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - clusterinformations - verbs: - - get - - create - - update - # KubeControllersConfiguration is where it gets its config - - apiGroups: ["crd.projectcalico.org"] - resources: - - kubecontrollersconfigurations - verbs: - # read its own config - - get - # create a default if none exists - - create - # update status - - update - # watch for changes - - watch ---- -kind: ClusterRoleBinding -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-kube-controllers -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: calico-kube-controllers -subjects: -- kind: ServiceAccount - name: calico-kube-controllers - namespace: kube-system ---- - ---- -# Source: calico/templates/calico-node-rbac.yaml -# Include a clusterrole for the calico-node DaemonSet, -# and bind it to the calico-node serviceaccount. -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-node -rules: - # The CNI plugin needs to get pods, nodes, and namespaces. - - apiGroups: [""] - resources: - - pods - - nodes - - namespaces - verbs: - - get - - apiGroups: [""] - resources: - - endpoints - - services - verbs: - # Used to discover service IPs for advertisement. - - watch - - list - # Used to discover Typhas. - - get - # Pod CIDR auto-detection on kubeadm needs access to config maps. - - apiGroups: [""] - resources: - - configmaps - verbs: - - get - - apiGroups: [""] - resources: - - nodes/status - verbs: - # Needed for clearing NodeNetworkUnavailable flag. - - patch - # Calico stores some configuration information in node annotations. - - update - # Watch for changes to Kubernetes NetworkPolicies. - - apiGroups: ["networking.k8s.io"] - resources: - - networkpolicies - verbs: - - watch - - list - # Used by Calico for policy information. - - apiGroups: [""] - resources: - - pods - - namespaces - - serviceaccounts - verbs: - - list - - watch - # The CNI plugin patches pods/status. - - apiGroups: [""] - resources: - - pods/status - verbs: - - patch - # Calico monitors various CRDs for config. - - apiGroups: ["crd.projectcalico.org"] - resources: - - globalfelixconfigs - - felixconfigurations - - bgppeers - - globalbgpconfigs - - bgpconfigurations - - ippools - - ipamblocks - - globalnetworkpolicies - - globalnetworksets - - networkpolicies - - networksets - - clusterinformations - - hostendpoints - - blockaffinities - verbs: - - get - - list - - watch - # Calico must create and update some CRDs on startup. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ippools - - felixconfigurations - - clusterinformations - verbs: - - create - - update - # Calico stores some configuration information on the node. - - apiGroups: [""] - resources: - - nodes - verbs: - - get - - list - - watch - # These permissions are only required for upgrade from v2.6, and can - # be removed after upgrade or on fresh installations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - bgpconfigurations - - bgppeers - verbs: - - create - - update - ---- -# Flannel ClusterRole -# Pulled from https://github.com/coreos/flannel/blob/master/Documentation/kube-flannel-rbac.yml -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: flannel -rules: - - apiGroups: [""] - resources: - - pods - verbs: - - get - - apiGroups: [""] - resources: - - nodes - verbs: - - list - - watch - - apiGroups: [""] - resources: - - nodes/status - verbs: - - patch ---- -# Bind the flannel ClusterRole to the canal ServiceAccount. -kind: ClusterRoleBinding -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: canal-flannel -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: flannel -subjects: -- kind: ServiceAccount - name: canal - namespace: kube-system ---- -apiVersion: rbac.authorization.k8s.io/v1 -kind: ClusterRoleBinding -metadata: - name: canal-calico -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: calico-node -subjects: -- kind: ServiceAccount - name: canal - namespace: kube-system - ---- -# Source: calico/templates/calico-node.yaml -# This manifest installs the canal container, as well -# as the CNI plugins and network config on -# each master and worker node in a Kubernetes cluster. -kind: DaemonSet -apiVersion: apps/v1 -metadata: - name: canal - labels: - k8s-app: canal -spec: - selector: - matchLabels: - k8s-app: canal - updateStrategy: - type: RollingUpdate - rollingUpdate: - maxUnavailable: 1 - template: - metadata: - labels: - k8s-app: canal - spec: - nodeSelector: - kubernetes.io/os: linux - hostNetwork: true - tolerations: - # Make sure canal gets scheduled on all nodes. - - effect: NoSchedule - operator: Exists - # Mark the pod as a critical add-on for rescheduling. - - key: CriticalAddonsOnly - operator: Exists - - effect: NoExecute - operator: Exists - serviceAccountName: canal - # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force - # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. - terminationGracePeriodSeconds: 0 - priorityClassName: system-node-critical - initContainers: - # This container installs the CNI binaries - # and CNI network config file on each node. - - name: install-cni - image: calico/cni:v3.15.0 - command: ["/install-cni.sh"] - env: - # Name of the CNI config file to create. - - name: CNI_CONF_NAME - value: "10-canal.conflist" - # The CNI network config to install on each node. - - name: CNI_NETWORK_CONFIG - valueFrom: - configMapKeyRef: - name: canal-config - key: cni_network_config - # Set the hostname based on the k8s node name. - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - # CNI MTU Config variable - - name: CNI_MTU - valueFrom: - configMapKeyRef: - name: canal-config - key: veth_mtu - # Prevents the container from sleeping forever. - - name: SLEEP - value: "false" - volumeMounts: - - mountPath: /host/opt/cni/bin - name: cni-bin-dir - - mountPath: /host/etc/cni/net.d - name: cni-net-dir - securityContext: - privileged: true - # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes - # to communicate with Felix over the Policy Sync API. - - name: flexvol-driver - image: calico/pod2daemon-flexvol:v3.15.0 - volumeMounts: - - name: flexvol-driver-host - mountPath: /host/driver - securityContext: - privileged: true - containers: - # Runs canal container on each Kubernetes node. This - # container programs network policy and routes on each - # host. - - name: calico-node - image: calico/node:v3.15.0 - env: - # Use Kubernetes API as the backing datastore. - - name: DATASTORE_TYPE - value: "kubernetes" - # Configure route aggregation based on pod CIDR. - - name: USE_POD_CIDR - value: "true" - # Wait for the datastore. - - name: WAIT_FOR_DATASTORE - value: "true" - # Set based on the k8s node name. - - name: NODENAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - # Don't enable BGP. - - name: CALICO_NETWORKING_BACKEND - value: "none" - # Cluster type to identify the deployment type - - name: CLUSTER_TYPE - value: "k8s,canal" - # Period, in seconds, at which felix re-applies all iptables state - - name: FELIX_IPTABLESREFRESHINTERVAL - value: "60" - # No IP address needed. - - name: IP - value: "" - # The default IPv4 pool to create on startup if none exists. Pod IPs will be - # chosen from this range. Changing this value after installation will have - # no effect. This should fall within `--cluster-cidr`. - # - name: CALICO_IPV4POOL_CIDR - # value: "192.168.0.0/16" - # Set MTU for the Wireguard tunnel device. - - name: FELIX_WIREGUARDMTU - valueFrom: - configMapKeyRef: - name: canal-config - key: veth_mtu - # Disable file logging so `kubectl logs` works. - - name: CALICO_DISABLE_FILE_LOGGING - value: "true" - # Set Felix endpoint to host default action to ACCEPT. - - name: FELIX_DEFAULTENDPOINTTOHOSTACTION - value: "ACCEPT" - # Disable IPv6 on Kubernetes. - - name: FELIX_IPV6SUPPORT - value: "false" - # Set Felix logging to "info" - - name: FELIX_LOGSEVERITYSCREEN - value: "info" - - name: FELIX_HEALTHENABLED - value: "true" - securityContext: - privileged: true - resources: - requests: - cpu: 250m - livenessProbe: - exec: - command: - - /bin/calico-node - - -felix-live - periodSeconds: 10 - initialDelaySeconds: 10 - failureThreshold: 6 - readinessProbe: - httpGet: - path: /readiness - port: 9099 - host: localhost - periodSeconds: 10 - volumeMounts: - - mountPath: /lib/modules - name: lib-modules - readOnly: true - - mountPath: /run/xtables.lock - name: xtables-lock - readOnly: false - - mountPath: /var/run/calico - name: var-run-calico - readOnly: false - - mountPath: /var/lib/calico - name: var-lib-calico - readOnly: false - - name: policysync - mountPath: /var/run/nodeagent - # This container runs flannel using the kube-subnet-mgr backend - # for allocating subnets. - - name: kube-flannel - image: quay.io/coreos/flannel:v0.11.0 - command: [ "/opt/bin/flanneld", "--ip-masq", "--kube-subnet-mgr" ] - securityContext: - privileged: true - env: - - name: POD_NAME - valueFrom: - fieldRef: - fieldPath: metadata.name - - name: POD_NAMESPACE - valueFrom: - fieldRef: - fieldPath: metadata.namespace - - name: FLANNELD_IFACE - valueFrom: - configMapKeyRef: - name: canal-config - key: canal_iface - - name: FLANNELD_IP_MASQ - valueFrom: - configMapKeyRef: - name: canal-config - key: masquerade - volumeMounts: - - mountPath: /run/xtables.lock - name: xtables-lock - readOnly: false - - name: flannel-cfg - mountPath: /etc/kube-flannel/ - volumes: - # Used by canal. - - name: lib-modules - hostPath: - path: /lib/modules - - name: var-run-calico - hostPath: - path: /var/run/calico - - name: var-lib-calico - hostPath: - path: /var/lib/calico - - name: xtables-lock - hostPath: - path: /run/xtables.lock - type: FileOrCreate - # Used by flannel. - - name: flannel-cfg - configMap: - name: canal-config - # Used to install CNI. - - name: cni-bin-dir - hostPath: - path: /opt/cni/bin - - name: cni-net-dir - hostPath: - path: /etc/cni/net.d - # Used to create per-pod Unix Domain Sockets - - name: policysync - hostPath: - type: DirectoryOrCreate - path: /var/run/nodeagent - # Used to install Flex Volume Driver - - name: flexvol-driver-host - hostPath: - type: DirectoryOrCreate - path: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds ---- - -apiVersion: v1 -kind: ServiceAccount -metadata: - name: canal - ---- -# Source: calico/templates/calico-kube-controllers.yaml -# See https://github.com/projectcalico/kube-controllers -apiVersion: apps/v1 -kind: Deployment -metadata: - name: calico-kube-controllers - labels: - k8s-app: calico-kube-controllers -spec: - # The controllers can only have a single active instance. - replicas: 1 - selector: - matchLabels: - k8s-app: calico-kube-controllers - strategy: - type: Recreate - template: - metadata: - name: calico-kube-controllers - labels: - k8s-app: calico-kube-controllers - spec: - nodeSelector: - kubernetes.io/os: linux - tolerations: - # Mark the pod as a critical add-on for rescheduling. - - key: CriticalAddonsOnly - operator: Exists - - key: node-role.kubernetes.io/master - effect: NoSchedule - serviceAccountName: calico-kube-controllers - priorityClassName: system-cluster-critical - containers: - - name: calico-kube-controllers - image: calico/kube-controllers:v3.15.0 - env: - # Choose which controllers to run. - - name: ENABLED_CONTROLLERS - value: node - - name: DATASTORE_TYPE - value: kubernetes - readinessProbe: - exec: - command: - - /usr/bin/check-status - - -r - ---- - -apiVersion: v1 -kind: ServiceAccount -metadata: - name: calico-kube-controllers - ---- -# Source: calico/templates/calico-etcd-secrets.yaml - ---- -# Source: calico/templates/calico-typha.yaml - ---- -# Source: calico/templates/configure-canal.yaml - - diff --git a/artifacts/kubezero-calico/kustomization.yaml b/artifacts/kubezero-calico/kustomization.yaml deleted file mode 100644 index d91e517a..00000000 --- a/artifacts/kubezero-calico/kustomization.yaml +++ /dev/null @@ -1,8 +0,0 @@ -namespace: kube-system - -resources: -- canal.yaml - -patchesStrategicMerge: -- logging.yaml -- prometheus.yaml diff --git a/artifacts/kubezero-calico/logging.yaml b/artifacts/kubezero-calico/logging.yaml deleted file mode 100644 index aa4cfb81..00000000 --- a/artifacts/kubezero-calico/logging.yaml +++ /dev/null @@ -1,16 +0,0 @@ -apiVersion: apps/v1 -kind: DaemonSet -metadata: - name: canal -spec: - template: - spec: - containers: - - name: calico-node - env: - - name: FELIX_LOGSEVERITYSCREEN - value: "Warning" - - name: FELIX_LOGSEVERITYFILE - value: "Warning" - - name: FELIX_LOGSEVERITYSYS - value: "" diff --git a/artifacts/kubezero-calico/prometheus.yaml b/artifacts/kubezero-calico/prometheus.yaml deleted file mode 100644 index 1b183e27..00000000 --- a/artifacts/kubezero-calico/prometheus.yaml +++ /dev/null @@ -1,14 +0,0 @@ -apiVersion: apps/v1 -kind: DaemonSet -metadata: - name: canal -spec: - template: - spec: - containers: - - name: calico-node - env: - - name: FELIX_PROMETHEUSGOMETRICSENABLED - value: "false" - - name: FELIX_PROMETHEUSMETRICSENABLED - value: "true" diff --git a/artifacts/kubezero-calico/remove-namespace.patch b/artifacts/kubezero-calico/remove-namespace.patch deleted file mode 100644 index 65343b7e..00000000 --- a/artifacts/kubezero-calico/remove-namespace.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- canal.yaml.orig 2020-07-02 16:56:37.279169481 +0100 -+++ canal.yaml 2020-07-02 16:56:37.285169542 +0100 -@@ -5,7 +5,6 @@ - apiVersion: v1 - metadata: - name: canal-config -- namespace: kube-system - data: - # Typha is disabled. - typha_service_name: "none" -@@ -3438,7 +3437,6 @@ - apiVersion: apps/v1 - metadata: - name: canal -- namespace: kube-system - labels: - k8s-app: canal - spec: -@@ -3683,7 +3681,6 @@ - kind: ServiceAccount - metadata: - name: canal -- namespace: kube-system - - --- - # Source: calico/templates/calico-kube-controllers.yaml -@@ -3692,7 +3689,6 @@ - kind: Deployment - metadata: - name: calico-kube-controllers -- namespace: kube-system - labels: - k8s-app: calico-kube-controllers - spec: -@@ -3706,7 +3702,6 @@ - template: - metadata: - name: calico-kube-controllers -- namespace: kube-system - labels: - k8s-app: calico-kube-controllers - spec: -@@ -3741,7 +3736,6 @@ - kind: ServiceAccount - metadata: - name: calico-kube-controllers -- namespace: kube-system - - --- - # Source: calico/templates/calico-etcd-secrets.yaml diff --git a/charts/kubezero-kiam/README.md b/charts/kubezero-kiam/README.md index 050558b1..9d4ca944 100644 --- a/charts/kubezero-kiam/README.md +++ b/charts/kubezero-kiam/README.md @@ -25,7 +25,8 @@ The required certificates for Kiam server and agents are provided by a local cer [KubeZero cert-manager](../kubezero-cert-manager/README.md) ## Metadata restrictions -Required for the *csi ebs plugin* and most likely various others assuming basic AWS information. +Some services require access to some basic AWS information. One example is the `aws-ebs-csi` controller. +By default all access to the meta-data service is blocked, expect for: - `/latest/meta-data/instance-id` - `/latest/dynamic/instance-identity/document` @@ -76,3 +77,5 @@ Required for the *csi ebs plugin* and most likely various others assuming basic ## Resources - https://github.com/uswitch/kiam - https://www.bluematador.com/blog/iam-access-in-kubernetes-kube2iam-vs-kiam + +![Kiam overview](./kiam_architecure.png) diff --git a/charts/kubezero-kiam/README.md.gotmpl b/charts/kubezero-kiam/README.md.gotmpl index 9a441b27..6382e4e9 100644 --- a/charts/kubezero-kiam/README.md.gotmpl +++ b/charts/kubezero-kiam/README.md.gotmpl @@ -19,7 +19,8 @@ The required certificates for Kiam server and agents are provided by a local cer [KubeZero cert-manager](../kubezero-cert-manager/README.md) ## Metadata restrictions -Required for the *csi ebs plugin* and most likely various others assuming basic AWS information. +Some services require access to some basic AWS information. One example is the `aws-ebs-csi` controller. +By default all access to the meta-data service is blocked, expect for: - `/latest/meta-data/instance-id` - `/latest/dynamic/instance-identity/document` @@ -34,3 +35,5 @@ Required for the *csi ebs plugin* and most likely various others assuming basic ## Resources - https://github.com/uswitch/kiam - https://www.bluematador.com/blog/iam-access-in-kubernetes-kube2iam-vs-kiam + +![Kiam overview](./kiam_architecure.png) diff --git a/charts/kubezero-kiam/kiam_architecure.png b/charts/kubezero-kiam/kiam_architecure.png new file mode 100644 index 00000000..b8fb789c --- /dev/null +++ b/charts/kubezero-kiam/kiam_architecure.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a37511a23d3180d5c7d236c004a56c4b69afda33315920570e99e391ee1e732 +size 43992